lamborghini25
04-14-2005, 01:25 AM
I have an Adrenaline LCD Feather. I had recently let the charge drain out and recharged it with no problem. A few days later I charged it when it was at 3/4 full and when I turned it on and plugged it in to charge it said -PIN- so i just let it charge and couldn't figure out what to do. Well I have been told to let the charge run out again and it will give me number to enter in or something. So a few days later the charge is gone and I go to charge it, turn it on plug it in, it says -PIN- and once it starts charging it says SAFE and the battery indicator is cascading. So i unplug it after a bit and turn it off then back on and it still says -PIN-. I hold the trigger down press the green button once to bring up the 0--- then again for 00-- then again for 000- and once more for 0000, I then press and release the red button all while depressing the trigger, it just brings back 0---. So when I punch in 0000 by holding the trigger down and pressing the green button four times then release the trigger it just brings back -PIN-. Also when I punch in 0000 as previously mentioned and then keep holding the trigger down and press and hold the red button then let go of the trigger, I can hear the gun clicking and the intellifeed runs, kind of like my gun is live(haven't tried it with air yet). So I have no idea what to do. Any suggestions pls.