Lcd Firing Problem

[fire7057]

My friend just bought a 2k1 lcd and he is having problems firing. the lpr is fine but he cant shoot more than one ball a second. does anyone have an idea what is wrong. the gun is on mode 6. i dont know what that means and we tried to find everything out in the manual but we need some help thanks!

[FencerSMS]

i dont know what mode 6 is, not sure what mode the board is supposed to be in, but make sure your settings are correct. dwell, MROF, the settings that you can change in the LCD board. make sure your running a HP tank, not a LP tank (that shouldnt affect rof, but always good to be using the right type of tank).

if that doesnt help, then id suggest contacting one fo the MT's that sponsor the site.

[bush'em]

It's not mode 6, it's mode b, which is semi-auto and what it should be. So basically he can walk the trigger and it only shoots around 1 bps?

[myangelismybaby]

have him open the grip up and press and hold the bottom two buttons for about three seconds. they little black cylinder like. when you hold both buttons for more than 2 seconds it will reset the board to default settings. meaning your MROF for semi will be about 14. mode b is true semi. its possible he was just pressing buttons and messed up the MROF.