RAM Adjustement With Cobra Bolt

[Boun # 13]

I 've adjust my ram stroke with my new cobra bolt
but i notice that the pin is not exactly the same as the stock bolt, it less biger.
So i play with it, when i close the breech i felt a little resistance and it clicks firmly.
But after 2 or 3 days of training i notice some hit in the rear portion of my hammer ! : //
i don't think it 's normal !
but i dunno if it cames from the bolt iself or from my ram adjustement !!

[cad01001]

When i read your post its as if i could have written the exact same thing!

I too installed my cobra bolt yesterday. Same with the clicking thing, and after a days play the brass hammer has marks in the back!!!

And another thing, i noticed that the stock bolt varies less in fps.

[Digitalpunk]

Sounds like you set your RAM too tight. Rotate it about another 1/4 back, maybe a little less.

[Boun # 13]

what an Angel Teck will think about it ?

[Tempest261]

All that I know is that the ram definately needs to be re-adjusted after you install the cobra bolt. Read the manual on how to do this.