Ram Seal Probs

[renrag75]

Ok folks, I am having a problem that I need some advice on. I have no idea what the tech term for this part is, but the seal between the swing-out door and the ram exhaust has come loose on my 05 speed. It appears to just be 'glued' in place underneath the swing-out bolt door. My question is what type of adhesive is best to put it back in place? Thanks.

Jason

[Bigal1]

I had the same problem happen to me. (I assume by "swing out door" you mean the breach) The first time it came off, I used super glue. Then it came off again and I lost the seal. I haven't reinstalled it and it works just fine.

So, maybe my answer isn't the correct one but I'm using my gun just fine without the seal.

[hooha]

it doesn't matter too much. with the seal in place, you'll get a little better efficiency, and the gun will be a little quieter. that's all. Super glue gel (not liquid) or expoy resin work well for keeping it in place.

[tgaffner]

Glue it back in, or buy a new one.

You can get them at any Master Tech store.

[corrupt123]

i used some grease.... mind you thats on a fly but it's the same on a 5peed. there is/was enough suction to keep it in there. same idea as lock-socks