Looking for advice...

[nerosrevenge]

Hey there!

I am new to the forum and I have to say I am impressed with the wealth of information here!

I am considering the purchase of an Angel LED and I have several questions perhaps someone would be kind enough to help with:

Performance:
1. What rate of fire can I expect from say a 1999 LED?
2. What pressure do Angels run on?
3. Are there any tips on what to look for when purchasing a used Angel?

Upgrades:
1. What are the most common/popular upgrades for the Angel LED?
2. What are the most worth while?
3. Are there any upgrades to avoid?

Thanks so much for the help!

NERO
[]*[]

[Vantage_TeS]

12+bps
High Pressure so 800-900psi
Gas it up if possible and cycle it a couple times

Feedneck/barrel
Barrel
WAS/ACE

[nerosrevenge]

That's a great help Vantage thx!

Is there a way to up the bps? I'm not looking for 20+ but is there a way to increase the speed?

As for a barrel I am thinking 14" Smart Parts Freak.

I already have an air supply that will work.

When cycling it for the first time are there any specific things I should be looking for (besides the obvious leaks, etc)?

Thanks!

[Eclipse This]

if it's shooting without obvious leaks your pretty much good. these guns are really solid. if they don't get messed with too much they keep on doing what they do best.

as for bumping up your bps ace it and get an aftermarket board. morlock or predators have been popular as of late. they'll do wonders for your speed and the eyes are always a great enhancement to a gun.

make sure you have a charger

bolts are also a quick upgrade that can improve your preformace. although the stock one is just fine. if you happen to get a shocktech supa fly bolt ( white bolt with 3 holes in the face) drill the center out of it. makes a vast improvement.

[nerosrevenge]

Thanks Eclipse very helpful, I'll look into those upgrades!