leak!!

[fire7057]

i took my led apart last night and where the mini reg connects to the conector there is a little black tube. the gun is a 99 black led. i dont know how the gun is leaking. all i know is when i screw in the nitro it leaks from where the reg connects to the gun?? i cant figure it out. :drink:

[duckpatch]

i took my led apart last night and where the mini reg connects to the conector there is a little black tube. the gun is a 99 black led. i dont know how the gun is leaking. all i know is when i screw in the nitro it leaks from where the reg connects to the gun?? i cant figure it out. :drink:
If the air is coming out the hole where the crack pipe attatches to body, you probably have a bad LPR o-ring or scratch as I did in the LPR and had to replace it

[Blackadder]

Make sure that it is not coming out of the small hole in the body just above the ASA.
If it is you will have to reset the pressure on the LPR. I spent an hour on my first LED hunting down a ASA leak and found that the LPR had a pile of disks in it and was overpressuring and venting out of this port.These disks are used to adjust the pressure of your LPR aruond 75 PSI. Also another thing to look for - there should be a small "O" ring around the ASA mounting bolt on the outside this compresses between the body and the ASA and keeps the air from leaking from the retaining bolt.