Breech problem

[ThirteenthCurve]

ok, on the 2k lcd i got. right now the breech doesnt open/close correctly. the breech nob/rod just pulls all the way out, and then the breech opens, only...very stiffly.

now...how could i fix this, what parts do i need...etc?

thanks for help.

[bush'em]

So you can pull the breech rod all the way out without taking the back plate off? If you can, you need a new rod. As for it being hard to open, the rod that it pivots on could be dirty/rusty. Try taking it out and cleaning it.

[crashdan]

try some rubbing alchohol on the pivot screws of the breech and, if your breech rod is intact, take that out and clean that as well

[ThirteenthCurve]

how exactly do i go about taking out the pivot rod?

[crashdan]

try mine first... u do that without removing it.. removing the breech can be quite a task...