help :(

[HaMmY210]

ok my kit cam eon thursday, and got some air and paint today (friday), i set everything up as stated except the 100psi lpr without evolpe lpr cap, my psi was low but i dident know how to test it.... so ne way i cas it up and i take 1 shot, and click, i lock at my hammer and its snapped clean in 2, i have no idea why, so ne way i replace it with the spare stronger 1, im adjusting my lpr i take 1 of the screws off get my lpr to bout 60psi and PSSSPSSPSPSSS my guage comes flying off, i turn my air off, and screw the small screw back in, turn my air back on and same thing happens except this time the screw is long gone i searched for bout an hour for it, i really need help what should i do, p.s i have an 04 speed

[esandov]

Wow.

Was the marker gassed up when you tried to take one of the LPR Adj. screws off? You may have stripped the threads considering the preasure. I dont understand what you mean about the hammer snapping in half? What is your experience maintaining your marker? You may want to take that to a tech becaue that sounds pretty vicious.

[corrupt123]

you probably cracked the hammer because you're running it at 100 psi, and it's pure delrin

as for the gauge and screw, stripped. probably bad manufactering.

[El Pirata]

I think it says as a warning not to do any adjustment while air'd up. The Pssssst sound you heard is because you still had your air on when you went to remove your pressure gauge. You're probably looking at using a ton of JB Weld to fix the threads in your LPR. While I am sure Evolve will be able to fix this they'll probably make you pay due to user error. I really hate to say it but you've just learned a hard lesson about why not to tinker with your marker while air'd up.

[Trigga Nometry]

I think the real reason that your hammer snapped is due to the new warning that comes with the new Newton kit:

[corrupt123]

lol. good call by evovle. delrin is too soft a material, im surprised they managed to tap it efficiently.

[Jetwing@Impactpaintball]

so how are u suppose to fit it correctly?

[Benfrain]

Think they need a better proof reader at Evolve, first sentence of the second paragraph doesn't even make sense ;) Just being pedantic :)

[HaMmY210]

i sent evolve an email on friday night, recived one from them and they are sending me a new lpr body, but can ne 1 tell me how do i find out the pressure of my stock lpr

[El Pirata]

Angel Tool Kit: http://secure.fixmyangel.com/catalog-product50

[corrupt123]

use the angel tool kit, or just put on the evovle adjuster cap but gut the adjuster. that should give you a good readout.

[kevc2181]

how exactly is the all derlin hammer supposed to be fitted?

[kevc2181]

bump...:boink::boink::boink::boink::boink:

[snoop]

I got the all derlin hammer on, just make sure it is in as tight as u can get it w.o breaking it :) and make sure that ur lpr isn't too high.. which might snap it because of the extra pressure