PDA

View Full Version : need som help....

Tigar
03-11-2005, 07:36 AM
i got maxflo manifold on my ir3. i was wondering on how to clean the mf and if anyonw knows where i can find a user manual to the mf?
if someone had the time to write down something about the features of the ir3, it would have been NiCE.
thnx
:hititraw:
TheDragonJedi
03-15-2005, 11:40 AM
go to www.wdp.tv/manuals

read the manual for the IR3

then go to :blasting: www.smartparts.com

and find the manual for the maxflo

as the Great paki always Says RTFM
Trigga Nometry
03-15-2005, 11:47 AM
Check here on AOG too!

http://www.angel-owners.com/manuals.php
Tigar
03-15-2005, 12:38 PM
thnx... is this nessesery? some say i should, others dont...
TheDragonJedi
03-15-2005, 12:50 PM
well that depends. I clean my IR3's internal every month. Clean out all the old grease and apply new grease on all of the oring seals as well as grease the LPR and the shims.

I don't have a maxflo but I know there are rebuild kits out there for it. Usually a drop of FORCE OIL in there before you connect the tank does the trick lubricating it.

Please note:::
I said force oil in the Maxflo, not the tank, it is dangerous to put oil in a tank either in the Regulator or fill nipple. Never let anyone do this to your tank saying it will fix it. EVER!!!!!!!!!!!!!!!
cause it wont. It will only make things worse like blowing up your tank, under your arm, while your playing.
Vantage_TeS
03-15-2005, 12:57 PM
That and half the other people on your team.
HottRodd
03-15-2005, 01:17 PM
ok, so im new (just got me first angel). Now i have a friend who has had an angel for awhile and he told me to put a drop of oil in the asa before i play and dry shoot like 25 times. Is this what you are saying to NEVER do? please clarify

thanks
Tigar
03-15-2005, 03:14 PM
oil under the pressure that is in the tank is somthing u dont wont to play with... but there is a difference from putting it inn the tank and using the tank pressure to move to move it around... aint that so?
TheDragonJedi
03-15-2005, 04:58 PM
ok, so im new (just got me first angel). Now i have a friend who has had an angel for awhile and he told me to put a drop of oil in the asa before i play and dry shoot like 25 times. Is this what you are saying to NEVER do? please clarify

thanks


1) oil in the ASA is fine. This get's distributed through the internals of your gun.

2) Oil in the Air tank is not fine. This is dangerous.

The oil you put in the ASA will not get into the tank
TheDragonJedi
03-15-2005, 05:06 PM
oil under the pressure that is in the tank is somthing u dont wont to play with... but there is a difference from putting it inn the tank and using the tank pressure to move to move it around... aint that so?


No That is wrong as well. you don't want oil in your tank for any reason whatsoever. It does not matter what you were told NEVER EVER EVER put oil anywhere IN your air tank. EVER!!!!!

follow this link for more info
http://www.angel-owners.com/showthread.php?t=15032
Vantage_TeS
03-15-2005, 09:09 PM
Air in the fill nipple=no no
Air in the macroline that is always at under 900psi = ok

The difference is about 3000psi.

Know how a diesel engine works? You take drops of diesel mixed with air and squeeze it until there is enough energy created [from compressing air] to make the diesel [orrr say paintball gun oil?] explode.

Paintball oil into fill nipple, then jam in a bunch of compressed air. BANG you just lost the upper half of your body. I'm not joking in the least.
Tigar
03-16-2005, 06:26 AM
ok. i think i ment the same as u said dragonjedi. the oil u use is a silicon oil? or?