PDA

View Full Version : Buttons for fma 45 frame

Snooky
03-10-2005, 05:43 AM
Does anyone know who sells buttons that would fit in the FMA 45 frame that fits on fly's?

I had my buttons from my fly's 90 in there but then after putting the board into the 45 frame I realized that there was no way to get the board back out unless I really wanted to force it or break the buttons. Needless to say I ended up breaking the buttons to get it out. Didn't have anything to shave them at the time so that was the option. The leaf wasn't how I wanted it and no good way to bend it while it was still in the frame.

Anyway ordered lcd buttons to find out they are much shorter then the buttons from a fly and now looking at replacing the buttons perferably in black.
Snooky
03-12-2005, 06:31 PM
Anyone?
IR3-ANGEL
03-12-2005, 06:39 PM
You would have to buy the LCD buttons. Cobrapaintball.com sells them, under Angel accessories, under LCD.
Snooky
03-12-2005, 07:06 PM
the lcd buttons aren't long but are short and then have thin fat ends. the fly buttons are long but have fatter ends.
IR3-ANGEL
03-12-2005, 07:19 PM
You need long buttons with thin ends?
tgaffner
03-12-2005, 07:30 PM
Nobody does that will work for your set-up.

Come on, get clever!!
Snooky
03-14-2005, 12:31 PM
|== looks like the lcd buttons.

||==== looks like the fly buttons.

I guess to simplyify what im talking about is where can i get replacement fly buttons?
narc
03-14-2005, 02:32 PM
Is it the Ir3 45 frame? You would need the LCD buttons. The frame has to be adapted to be used on a Fly.
Snooky
03-16-2005, 04:45 AM
Yeah its the IR3 45 frame. I bought LCD buttons and they are atleast a 1/4th of an inch too short so they dont even stick out the back of the frame atm, have to use an allenhead wrench to activate anything.
BoB
03-16-2005, 12:26 PM
Frame uses the iR3 and up style buttons. In some of the frames the boards sit tighter and the buttons will need to be slightly modified same holds true for some of the triggers. Please send me an email with your order number and we will send you out some buttons.

Bob
Snooky
03-18-2005, 09:18 PM
Bob do you use bob@fixmyangel.com? Sent an email there but didn't get a response, but didnt think to ask if it was correct email addy.
narc
03-19-2005, 02:37 AM
email him at robert@fixmyangel.com
Snooky
03-19-2005, 09:31 AM
Thanks Narc :)
ATSAR
05-05-2005, 09:46 PM
so the fly ones wont work?
ATSAR
05-07-2005, 02:04 PM
nvm, i talked to bob via telephone and he said fly ones should work just fine... you mayhave to sand a lil bit off though