PDA

View Full Version : Slow, busting and loud

TeamPanic17
03-07-2005, 01:34 PM
just had practice this weekend and my fly is shooting loud, The dwell is it 13 or it will bust paint, we use the xball direct paint. Don't no what the lpr is at i will get my kit soon. I would like to make the gun smoother and faster like my friends joy division is and not so loud and i need it to stop busting paint. please help.
P8ntSlinger44
03-07-2005, 04:31 PM
1 - make sure the ram is adjusted properly
2 - you have to check the lpr, it should be set at about 60
3 - set the dwell between 8 and 10
4 - AFTER setting the dwell and LPR, set the velocity to about 285 (or lower depending on local field regulations)
5 - make sure you have a decent paint to barrell match
6 - I dont know how good that paint is, but check to see if the problem of "busting" paint is due to poor quality paint.
7- use a large volumizer

After all of that you should be all set to roll.
TeamPanic17
03-07-2005, 08:37 PM
my ram is set
lpr is around 60-70
velocity is set
output pressure is at 190
paint matches barell. I use a freak
can't lower dwell anymore or it will bust
paint is good works with everyones shockers and timmys.
i have the stock volumizer on it


1 - make sure the ram is adjusted properly
2 - you have to check the lpr, it should be set at about 60
3 - set the dwell between 8 and 10
4 - AFTER setting the dwell and LPR, set the velocity to about 285 (or lower depending on local field regulations)
5 - make sure you have a decent paint to barrell match
6 - I dont know how good that paint is, but check to see if the problem of "busting" paint is due to poor quality paint.
7- use a large volumizer

After all of that you should be all set to roll.
HIOCTANE
03-07-2005, 08:49 PM
is it shooting any better
usa11220
03-07-2005, 10:23 PM
i would recommend trying to lower the dwell only to 12

with some guns just that single adjustment can make a world of difference
TeamPanic17
03-08-2005, 03:38 PM
[QUOTE=usa11220]i would recommend trying to lower the dwell only to 12

yea thats what i did. I won't no if it is going to keep busting till after i get the board reflashed.
DarkRipper
03-08-2005, 04:11 PM
What kind of loader?
TeamPanic17
03-08-2005, 08:19 PM
What kind of loader?
halo with victory board
usa11220
03-08-2005, 09:32 PM
what would getting a board flashed have anything to do with your angel being loud and breaking paint?
TeamPanic17
03-09-2005, 05:44 PM
what would getting a board flashed have anything to do with your angel being loud and breaking paint?
because i sent in my board and i can't shoot it right now so anything i do i can't tell if its fixing the problem :evilgrin:
Talon
03-09-2005, 06:50 PM
As far as I understand the dwell would not causing any kind of paint breaking alone. Lower the dwell, the velocity will also drop, but for now let's just see what happens when you lower the dwell to a value that's more reasonable. When was the last time you stripped everything down and did a good/thorough cleaning and lube?
TeamPanic17
03-09-2005, 09:48 PM
When was the last time you stripped everything down and did a good/thorough cleaning and lube?

I did that about 2 weeks ago and have only used it once because it still busted
lefty21
03-10-2005, 08:53 AM
not sure if the ball breakage problem has been fixed, but i've heard that the halo could be the problem...is the paint breaking inside thre breech b4 you even fire? if so i've heard that the halo stacks might cause to much pressure on the paint causing it to break. I don't know how to fix this problem :notsure:
Furby
03-10-2005, 10:50 AM
Detents, bro.
Talon
03-10-2005, 11:00 AM
Go with Furby's suggestion to check, clean, and realign your detents and eyes. Are your eyes working? Did you recheck your LPR after the rebuild? Still no dwell clarification as asked in my last response.
TeamPanic17
03-11-2005, 09:40 PM
ok well now the settings are
dwell 12
tr 2
lpr 50-55
inline 190-200

Busted 1 by the bolt and some in the barrel. Might be the paint. when i use good paint tomarrow i will no for sure. Any more suggestions please help. I have done everything. its not loud anymore and its smoother but just can't have that busting going on.

Thanks
KillerFlah
03-12-2005, 01:47 AM
not sure if the ball breakage problem has been fixed, but i've heard that the halo could be the problem...is the paint breaking inside thre breech b4 you even fire? if so i've heard that the halo stacks might cause to much pressure on the paint causing it to break. I don't know how to fix this problem :notsure:

grease the halo belt, adjust halo sensitivity and buy a jambolt.
TeamPanic17
03-13-2005, 05:51 PM
Played saturday and sunday for practice. NO BREAKS OR BOLT BUSTING!!! Thanks alot guys