PDA

View Full Version : HELP! 14-way blowing orings!!

Mindjob
03-05-2005, 09:08 PM
I disasembled my LED before I sent it to TAG to have the eye holes drilles prior to an Predator MOrlock install.

I reassembled it, now when I gass it up, I get a "POP" and air blowing out of the first hole in the top of the sight rail. Im not sure WTF I did wrong. Im wondering if I put the LPR together right, or maybe I have the 14 way assembled wrong.

Any suguestions?
Vantage_TeS
03-06-2005, 12:05 AM
The 14 way will vent when overpressurized, your LPR pressure is too high.

Check the manual for proper spring stack order, and get a gauge on there to adjust the pressure.

www.wdp.tv/manuals
hgroberts
03-06-2005, 10:19 AM
how much are you leaking it could be the ram or noid
Mindjob
03-06-2005, 11:15 AM
Its leaking BAD. It blows the two center orings on the 14 way when I gass up
Crazy4Paintball1
03-06-2005, 11:07 PM
Yeah adjust your LPR. Why did you disassemble your maker before sending it to TAG's? He does all that stuff for you....
Mindjob
03-08-2005, 06:38 PM
Yeah adjust your LPR. Why did you disassemble your maker before sending it to TAG's? He does all that stuff for you....

It was going to go out for anno.. until Nelson County Customs closed the anno shop for the winter (WTF?).

Anyhow.. its also a 'learning experience'. I got the LED cheap so I could mess with it. I got a Predator Morlock waiting to go in to.
MM77X
03-10-2005, 07:48 PM
If you can get it on an adjustable,slap on a gauge port,the lpr gauge,and bring it up slowly, you'll be able to see what's happening with the air.