Grease & Oil ????

[jaj1973]

Can you use The Angel Force Grease and Angel Force Oil on an LED or do you have to use the Love stuff or Dow33?

[El Pirata]

You can use the force stuff without a problem in place of love juice and dow 33.

[FRED-D]

damn, where do you grease and oil the angel speed 05? im new to this so please help me to where i can understand. thanks

[Crazy4Paintball1]

You might have better luck in the Speed Section not the led forum. However put a few drops of oil into your asa or your mini-reg and then dry fire your gun. That will get oil through all the air chambers and o-rings and stuff. Then you will want to take out your ram occasionally and lube it up real nice with some form of grease. Either Dow 33, Love Grease, Slick Honey, or some other paintball grease.

[Vantage_TeS]

damn, where do you grease and oil the angel speed 05? im new to this so please help me to where i can understand. thanks

Grease goes on all static (non moving) o-rings such as the ram and LPR body as well as seals on your flashtank.

Oil goes on all moving o-rings such as the piston in your minireg and LPR.

For greasing you need to remove the part and wipe off the old grease, replacing it with a light coat of fresh grease.

Oiling can be done by simply removing the macroline from the fitting on your minireg, putting a drop or two in the hole and then (gassing and) dryfiring it through the gun. 50 shots is plently.

Make sure to wipe the extra oil off the bolt as the oil will come up out of the exhaust valve.

[FRED-D]

thanks for all your help...now i can take people out on the field with no problem!!!