PDA

View Full Version : Empire reloader b can be intellifeed?


Jessy
03-03-2005, 08:36 PM
can you intellifeed, a empire reloader b?
is it benificial?
does badlands sell install evolve kits?

flyguy4
03-03-2005, 08:44 PM
yes
i dunno
i dunno probubly

Benfrain
03-04-2005, 03:36 AM
Yes, you can, exactly the same process as with a Halo B except you don't have eye cables to cut off.

scootie714
03-04-2005, 09:04 AM
Yes u can intellifeed a reloader b, my buddy bought a reloader b about a year ago that had been used as an I-halo by the owner of the local field.

-=X=-Trigger
03-04-2005, 09:12 AM
Yep, you sure can, if you are a Do-It-Yourselfer, check out the tread that explains how to do it all, if not, go to www.richmondriot.com and either buy the kit from them and do it yourself, or send the hopper into them and they will do it.

KillerFlah
03-04-2005, 10:14 AM
--->can you intellifeed, a empire reloader b?


I have one myself.

In my opinion, it's too much of a waste to intellifeed a reloader b.
Your sound activated board will be of no use after the work is done.

I would rather buy a regular halo and rip drive kit off ebay and have it intellifed/riotfed/whatever you want to call it...

At least, when you get tired of your riotfeed halo , you still have a blazing Reloader B you can use for your angel or a future marker that cannot be intellifed.

Vantage_TeS
03-04-2005, 11:29 AM
In my opinion, it's too much of a waste to intellifeed a reloader b.
Your sound activated board will be of no use after the work is done.

I would rather buy a regular halo and rip drive kit off ebay and have it intellifed/riotfed/whatever you want to call it...

At least, when you get tired of your riotfeed halo , you still have a blazing Reloader B you can use for your angel or a future marker that cannot be intellifed.

The process of intellifeeding a halo when done properly is 100% reversable so you can simply put your HaloB/Victory/Reloader/Whatever board back in.

When you go to remove the board just unsolder the wiring harness from the motor and pull the whole thing out, or if you are going to cut the wires cut them a couple inches back so you can resolder and heatshrink a cover over if you ever want to switch back.

jayr7309
03-22-2005, 06:11 PM
does anyone know how to install the intellifeed and share the wealth on the info

dirtywyrm
03-24-2005, 06:32 AM
Search, its on this site and its on PBN

Angel4boy
03-24-2005, 12:41 PM
richmond riot is no longer doing installs only selling the kits to get rid of them..you can call them if you have bought one and they will walk you through it but if you are like me you may want to send it in..