Trigger Adjustment 99 led

[nich10solo]

My brother just got a 99 led. The trigger pull seems quite long. Is there any way to adjust it, like screws or something like on my e-oracle?


Thanks

Nich

Sorry for the noob question.

[Blackadder]

There is but you must remove the grip frame take it easy so you don't yard out any wiring and in the top of the trigger you'll see two screws. One in the centre and one in the rear toward the micro switch. Just turn them in or out till the trigger is were you like it. If the marker actuates the selenoid when you power up and not on a trigger pull you will have to back off the rear screw as it has gome beyond the point of tripping the micro switch. I have both my LED's down to just hitting the side of the trigger to get them to fire.

[nich10solo]

Thanks a bunch. He'll really appreciate it.

[mearleman]

If it has a gold single trigger, it will only have one adjuster. The one that is by the microswitch. Youll be able to adjust were in the pull the marker fires but you wont be able to make the travel less or more.

[nich10solo]

Its a double trigger, stock. It isnt a conversion.

[mearleman]

ok if its a double it mostlikley has both adjustment screws

[Crazy4Paintball1]

Double will have both adjustment screws to adjust it with. Cutting or not using a spring will adjust how snappy it is.

For a single trigger. There is only one adjustment screw, however if you want to shorten the pull get a WD40 can or some can that come with the little plastic straw attachment piece. Cut a small pice off and sit it inside of the spring. It will serve as a trigger stopper. Works great.

[Blackadder]

Thats a great idea I'll definitly have to try that tonight