wow that was alot i think

[ropesofpaintxxx]

ok i put about 50-60 balls in my revvy and went out back and started to shoot it and it didnt chop but i had around 4000 psi left and know i only have around 3400, is that normal for a new speed not that older then 3 months used like 4 times ?????
800 psi drop with 50 ball ?????

its a 4500 tank and its HP too and i know u need LP but i havet got it yet,

but could u tell me if this is on and if the gun jsut needs broken


thanks
RFP

[firemedic30]

All of the seals maynot be just right yet. Give it a chance.

As far as "needing" an LP.....if you are shooting under 300 and get keep it under 300, then you don't "need" a LP. Now the LP will help with efficiency, but you don't need it.

[ropesofpaintxxx]

what does HP make it run hott or something ???? and i got the biggest volumizer on there , and i have a CP reg too

[firemedic30]

Some of the guys could not get their guns below 300. So yes, it does make it hot.

I am not too familiar with the CP reg. I agree with you, 50 balls, 800 drop it too much.

If it is really new, sometimes, they have too much packing grease in them and that screws with air consumption.

[ropesofpaintxxx]

ok thanks bro, but i was told that with the right REG u can run a HP tank on any gun

[firemedic30]

Can't help you there!!!! But try a search for mini-reg mod and see if that helps with any HP vrs LP probs.

Also, like I said, make sure the LPR and reg are clean.

Hope it helps!

[Sloffie]

Im not completely sure but i think if you are running the cp reg you should be fine with a HP tank.

[Paintballjc]

If you can find out your dwell, and lpr settings, i can help.... :bouncer:

[welted]

yeah, you should be fine with the CP reg, though with the mini-reg lots people (myself included) had problems getting under 300fps when running a HP tank.

yeah, dwell should be between 12-15, and lpr around 65

[ropesofpaintxxx]

ok i can do the dewell but i dont knoe how do do the LPr

[*I*A*]

when i tried an hp tank on my speed i couldnt get it below 300

[welted]

ok i can do the dewell but i dont knoe how do do the LPr
you need the Angel Toolkit, it has a special gauge to read the lpr pressure

[Clipkid243]

use the medium volumizer, too.