Ramping like crazy

[T.Money]

I just got done taking the gun apart and i have the tr set at 1 and now when i fire the gun it will keep shooting when i am done :notsure:

[firemedic30]

Adjust the tow screw in the trigger see if that cures it.

[T.Money]

I got the mt magnetic mod trigger and not sure where that screw is any other ideas? When i toke it apart i toke the trigger frame off and the reg and the ram bolt and exsaust valve.Is there anything i could of put back in wrong?

[flyguy4]

the toe is the part of your trigger pressing into the bored to make it trip.......... you can acsess it by the whole in your trigger

[usa11220]

what mode are you in?

[AngelFLY04MASSIVE]

that isnt ramping it is called bouncing. Ur tr controls bouncing, but angel users who dont read their manual think that tr1 is no bouncing but that isnt tru. where you set ur tr should depend on your toe and trigger positioning. tr1 one on some flies can actaully add bounce to your gun. If your trigger and toe are in the factory positioning than its the mod and you shouldnt use it if u want no bounce

[T.Money]

im in mod 1

[AngelFLY04MASSIVE]

im in mod 1


I understand that ur in mode 1, but it doesnt matter cause the mode doesnt make it bounce. if ur trigger isnt stock or at the factory set point then your gun bounces at a different tr setting. tr 1 only works when your gun comes from the factory. I made my trigger real slopy and messed with my boards stem and i had to play with my tr cause it started bouncing like crazy.

[T.Money]

ok so if i try turning up my tr to 22 then i shouldnt get any more bounce?

[Baboon]

did you install the magnet triggr yourself or did mt do it. some people bend the leaf spring with mt triggers which causes a lot of mechanical bounce. my fly was doing the same to me, just bend it back a little

[T.Money]

the mt did it and i didnt even mess with the trigger

[AngelFLY04MASSIVE]

work from tr1 and work forward untill u have no bounce.

[T.Money]

ok thanks :cheers: