Trigger Question

[SocomBoogieman]

On My Angel LED 98 I have a single trigger. I would like to get a double trigger frame put on it. My problem is none of the newer frames have the hole on the front of them that connects to reg. What do i do! :puzzled:


Heres a picture of what im talkin about.
http://www.geocities.com/socomboogieman/Problem.bmp

[josh_hill]

Well, there are a few double trigger frames out there for the LED.......but the easier and less expensive option is to grind off your current trigger guard, replace it with a special trigger guard for the LED that attaches around the crackpipe, and purchase yourself a double trigger.

Go here www.888paintball.com and click on exact search. Search for angel trigger

Page one has several triggers and a double trigger guard. Page 2 has several triggers and some double trigger frames. You need an LCD trigger. Take your pic, but I'd just chop off that guard.

(I'd have posted a link, but it just takes you to a blank page)

[SocomBoogieman]

1.Where can i get the gaurd cut off?
2.How do i know the trigger is lcd?

Because it does'nt say if it is or not, and there is like 2 triggers on 888.

[josh_hill]

You can do it yourself with a grinder or dremel. Just be very careful.

[SocomBoogieman]

I have seen people say you can put an lcd trigger frame on it. A lot of people told me to get an lcd triggre frame. Put the lcd does'nt have the hole to attach to the reg. Can i do this anyway possible?

[SocomBoogieman]

Wow i dont know where to get this done. Anyone know a place that will like mill this off for me? Or anyone got a dremel or grinder cuzz i surely dont.

[josh_hill]

You can't use an LCD, it just won't work. I'd be more than happy to grind it off for you, if you don't live too far away from me....

[SocomBoogieman]

Thanks for all the help hill..This post is closed people.