Couple of Questions???

[Paintball is Life]

K I am a new angel owner and I love them but I got a couple questions.

Ok the Screen says Oil Service Welcomed. How do you oil it correctly.

Second Question I hear it leaking right where the macro line goes into the actuall gun itself. Is that normal what could be wrong cause IDK.

Also I don't have the manual so how do you ajust the trigger correctly.

Just to give you some info I think my dwell is 11 and I am using a high pressure tank. Read my Sig for specs of my gun.
Robert

[Vantage_TeS]

www.wdp.tv/manuals

To oil you simply pull the macroline out of the fitting and put a couple drops of oil in the fitting. Put the line back in and gas up your gun. Dryfire around 50 time and then wipe the oil off the bolt. Done.

That will probably fix the leak too.

[Paintball is Life]

I have tried making the macro line longer cause I think it may have been to short but didn't work. I tried oiling it and it was oiled and now has no thing saying oil it but it still is leaking.
Also when I went out and shot it I had some mager drop offs every couple of shots or so. That probly is caused by the leak but IDK

Robert

[josh_hill]

Is it leaking where the fitting attaches to the gun, or where the line attaches to the fitting. If it's leaking at the gun/fitting, try taking it off, cleaning the threads and applying some BLUE, NON PERMANENT loc-tite. If it is leaking at the collar/line take the line out and make sure you have a clean, smooth, and even cut. If it's leaking from the collar/line and you can't fix it no matter how many times you shape it up, you may need to get a new fitting.

[Paintball is Life]

Can I just get a new fitting from anywhere or does it have to be like a angel fitting from a angel tech shop. Thanks for the advice I will try.

Robert

[Picasso101]

You can get a fitting anywere just make sure they are the standard 1/8 threaded. Befor you buy it take the macroline of from the fitting and file the end down so it is smooth and flat then put it back in and air it up. If that doesnt work buy a new fitting.

[Paintball is Life]

how do I get the fitting off cause I can't get it of. Any tips
Robert

[FrontManDan]

mole grips, the only tool you will ever need lol


if you still cant get it move then you might need 2 heat the it up 2 break the lock tight down

[Vantage_TeS]

If you look on the inside of the fitting you will notice it takes an allen key ;)

[Paintball is Life]

ya I noticed but it still won't come out. is there a place where I can buy it on the internet and which way do you turn it to get it out. I have been looking on fix my angel.com. Would a Universal Mini Reg Service Kit have what I want in it and what things should I have extra in my tool box for my Ir3
Robert