LCD Screen Questions

[angelover]

Hey guys,

Its about time that I start replacing my broken parts, so im getting some detents, cops sensor and rod, gas diverter kit, universal screw package etc.... And now Im finally getting a new LCD Screen, or hoping too. What happend is something jabbed my lcd screen so it cracked and there is now a huge black circle in the middle, that almost covers up the whole screen, and the glass is cracked. Before I could kinda read it (just like to the left and right of it, but I really couldnt tell what my settings were etc... Just last week the tape that connects the LCD to the board is starting to come off, and is ripped about halfway. Can I still replace my LCD screen? I cant seem to find pictures of just the screen and I want to know how you connect it and all. Lemme kno guys. Thanks for your help

PS- I know you can buy just the LCD screen for $50 at the site sponsors

[Vantage_TeS]

The screen is attached to a small control board. When you replace the screen you get both these pieces.

The screen part is everything after the black 6prong plug on the main board.

[angelover]

Thanks alot. So I should be able to do this by myself?

[Vantage_TeS]

Yup, pull the bottom of the screen up out of the clip and then use your fingernail to pop the top left corner where the connector is out.

To put the new one in you just put the connector in first then pop the bottom into the clip.

Maybe 5 min if you go slow and careful.