PDA

View Full Version : Is it easy?

nastylax8
02-17-2005, 10:47 PM
Is it easy to take off the trigger frame to get to the washers inthe trigger? I wanted to try and take them out and was wondering if it was easy to do. Is there anything extra i should know before i go and do this?
nastylax8
02-17-2005, 10:56 PM
guys, common, i need an answer, i leave for palm springs tommorow and i need to do the mod quickly?
nastylax8
02-17-2005, 11:14 PM
please help me
big azn
02-17-2005, 11:18 PM
Taking apart the frame can be pretty easy if you take the right steps. First make sure you have your manual. Next, I made sure, when I took the grip off, where every piece goes. Last i counted how many times I turned the screws so I didnt over tighten or kept any to loose. Just be very carefull with the vernie wheels, those caused me the most problems.
nastylax8
02-17-2005, 11:21 PM
what happened with em, should i set the all the way loosened(so the little dimple is all the way to the left)
big azn
02-17-2005, 11:26 PM
Nothing really happened just that when i took the vernie wheel off they fell out. I think it was cuz the magnets are so strong that (one wheel) just flung to one of the sides of the magnets.
speedjunky777
02-18-2005, 12:30 AM
just take the grip off then unplug everything and makesure u know the right order but if u dont u can look in the manual and then unscrew the screws fromt he frame into the body and then unscrew the trigger screws take the trigger out and take the washers off the pegs on the trigger put everything back together and make sure the vernier wheels stay in and that the eye ribbon doesnt get creased of bent. also dont tighten the little tiny screws that hold the trigger in place above the pegs down to tight otherwise the trigger pull will be really tight. with all the other screws just tighten um so they are snug and nuthin is loose then go mow some faces.
Tantrum840
02-18-2005, 11:12 AM
make sure your set screws for the vernier wheels are tight and they want fall out
Blackops_80
02-18-2005, 02:34 PM
I just got my 05 speed the other day and took apart the frame an there were no ruber washers. Does anyone know y?
SlasherXII
02-18-2005, 02:53 PM
I just got my 05 speed the other day and took apart the frame an there were no ruber washers. Does anyone know y?

When the Speed 05 first came out, there were no rubber washers. They were added later. You may have been given one before that period.
ZoomZoom
02-19-2005, 05:07 AM
the newest ones also dont have the washers
El Pirata
02-19-2005, 06:14 AM
It's a 5 minute job to remove the washers. 10 if you're nervous.