not need some help

[g-pimp a4ripper]

When you get an a4 does the gun already come set to reach maximun rate of fire with the sensi on and off or if it is off do i have have to set it to the max rate of fire. and when you are holding your gun which side is the exhaust vave side. Also how do you lube your angel? Do you just drop some love juice right under the bolt. where that thing is.

[Bruce]

With sensi on you must first calibrate your sensi or it will be capped at 13bps.With sensi off you will have to set your max rof. I would suggest setting it up to your hopper feed speed ie, if your hopper feeds at 16bps set your max rof to 15bps. This helps prevent chops.

With your A4 in hand the exhaust valve will be on your right.

Put a small amount of lube were you screw in your air bottle. Remove your bolt and then dry cycle it a couple of times. This will circulate the lube through the marker. Before putting your bolt back clean any excess lube from the breech area.

I would suggest reading your manual as it explains all and more in good detail :clown:

[tman-89]

With sensi on you must first calibrate your sensi or it will be capped at 13bps.With sensi off you will have to set your max rof.

when you turn your gun to live with sensi on, the cap is 13 until sensi is calibrated (takes about 1-13 shots). after you calibrate it, the gun limits your rof to match your hopper speed. the max rof with sensi on is 31.

[g-pimp a4ripper]

thanks