Odd problem with fly

[Barber]

When I turn the gun on and off from the back switch nothing happens, but when I plug it in to charge it says "phron" and it I touch the cord the board resets.

Thanks.

[coolchad]

i've never heard of this before.
please help (hes on my team)

[ckyxx87xx]

it really says pwron just turn the gun on...

[Barber]

The gun is on, nothing happens though. When I flip the switch nothing happens.

[streetluger56]

maybe the switch or its wires are broken

[Barber]

I'm hoping not.

[booboo808]

Well for starters maybe you could remove the back plate and verify that the wires are in good working condition.

[flyguy4]

no it only says that because its not on when your charging it
it has to be on when u put it on charge

[Barber]

I know that, and the gun doesn't come on.

I took it to the shop today and a wire needed put back on. When I took the back plate off last night the wires all looked good, one was just a little too loose.

[corrupt123]

maybe the batt line wasnt plugged into your board.

[Vantage_TeS]

Plug it in, get the PRON message. Flip to on, unplug and replug it. Make sure you push it in far enough, sometimes this is an issue.

If you get no charge borrow a IR3/LCD charger and give it a 10-15min charge with that (on position).

[Barber]

Everything was fine with the board and the charger works fine. The on/off switch broke. I fixed it. Everything is fine now.