Reloader B question

[xcarnx]

I have a reloader b set to fastest settings. Then only thing I get out of my gun when I use this is a blender. I want to know what settings you guys are using to get your gun to work with this loader. Dwell and things of that nature.

Thanks
xcarnx
Graphite A4 Fly
Max Flow inline reg/tank

[Owned13]

dwell 9
lpr 60
i've had my tr at 21 w/ the reloader b at the fastest setting and had no probs, but every gun is different

[Vantage_TeS]

Turn it down a little you will find it works better.

[trickytrix]

This problem is TOTALLY related to the quality of paint you're using, and the battery strength in the reloader.

Cheap and/or small paint causes LOTS of trouble with the reloader/fly combo at high rates of fire.

Good paint at decent bore size means no chops, and one sweet ride.

I've found that as the batteries lessen in voltage, the reloader will spin longer than it should, putting excess stress on the ball stack - always have good batteries.

Good luck

[Vantage_TeS]

Mm a trick that helps is to grease the drive belt, I have to do that on intellifeed halos so they don't blow paint at high ROF.

[Benfrain]

4 AA's in the Reloader and lowest speed setting (one flash orange on the LED on boot) = zero problems :)

Used one all last year on a Fly like this and it was amazing (you won't outshoot it either!)

[Raoul]

I use a RL-B on my Fly set on Fast3, Dwell 8 or 9, LPR @ 60, TR @ whatever, and have had zero problems!

So I'd say paint or detents, possible Ram adjustment, but it *does* werk on a Fly.

[hartless]

4 batteries and second speed setting. I use this on both my Speed and my Alias and it keeps up great with both.