My love juice is everywhere!

[rob_evanson]

I've just bought an A4 (second hand) and when I opened it up the bolt and breech were covered in love juice. I was under the impression that the juice should only be in the ram/hammer chamber.

Should I just clean and dry the bolt and chamber, or is it supposed to be lubed.

[TheDragonJedi]

Clean it out.

Shoot it several times to make sure most if not all of the oil is spread, remove the ram, clean out chamber, degrease and regrease the ram with love juice grease, and reinstall the ram to your liking.

Apply 1 or 2 drops of Love juice Oil (not grease) into the ASA just before the macroline into your reg, screw in HPA tank. turn marker on, fire about 20 shots to spread the oil into the internals and leave it at that. There really should not be any oil or grease visible as the grease is used for the LPR, Valve O-Rings, and Ram O-Rings, and the Oil lubricates any moving parts throughout the air delivery system. keep oil and grease away from any delrin bolt as it could make it Swell up and get stuck in your breech.

[Trigga Nometry]

That is some great advice Dragon.

And WOW, that has to be the funniest post title I've read in a long time :smile: .

[TheDragonJedi]

That is some great advice Dragon.

And WOW, that has to be the funniest post title I've read in a long time :smile: .



ROFLOL damn right I didn't notice how funny until just now. :wall:

and thanks.

[g-pimp a4ripper]

cool

[g-pimp a4ripper]

very cool

[rob_evanson]

Thanks for the info guys.

The title is just a typical example of British humour, it did make me smile as I typed it. I couldn't resist, especially with a product called love juice!

[El Pirata]

Nice thread title. Cool beans.