question .

[bigdozer]

i was wondering what is the expected msrp on the g7 and what is riotfeed or intellifeed and can it work on all angels and is it easily to install at home or do i have to take it to a mt?

[josh_hill]

Intellifeed will work on any angel with an intellifeed kit installed. It is relatively easy to do, if you have some basic soldering skills. Intellifeed is usually done with a revvy. Every time you pull the trigger faster than 2bps (I believe) the hopper feeds for a few seconds. It runs off of the angel's battery, and does not require a battery for the hopper.

Riot feed is done on Halo's and until they release a new version only works with the A4 Flys. Software in the Fly's let you program how the Riot feed feeds. It uses a 9 volt battery. I wanted one for my LCD, but they informed me that the current version wouldn't work well with it. There may be a new version in the future that will work with other angels though. http://www.richmondriot.com/Riotfeed.htm

As for the G7, I haven't heard anything about using riot/intellifeed.

[SlasherXII]

Intellifeeds can be hooked up to the G7 and every Angel except the Speed 05. If you open the grip panel you can see if there is an extra slot designated HOP. With pervious intellifeed setups, namely the LCD and IR3, you can connect a intellifeed directly with the gun powering the loader. With the Speed 03 up and to the G7, you will most likely be using either the Halo or an Egg. The voltage output of the battery from the gun is not enough to power these loaders thus needing it's own power supply. Currently there is no drop in conversion for the Egg or Halo but it is possible to have it done in the case of the riotfeed, MT iHalo, etc. There also is no solonoid replacement cover so you'd have to drill a hole to have the wires pass through.
Now depending how you have your hopper settings, you can set it to either every pull, every two pulls, and so forth. Another option is the total time it will spin at each activation period. It goes from 0.05 up to a full 1.00 second. Anything higher than 0.10 will result in chopping.
Im testing the iHalo from Russ and I will try to post a vid of these settings and how they affect the loader. And yes, it works on the Speed 03, A4, and Fly.
There are also videos from Russ @ Angelservicecenter.com. There is the Halo and Egg conversions.

[bigdozer]

is intellifeed the same as riotfeed and if not will riot feed work on the g7??

[SlasherXII]

It's the same thing. It's just that the guys at Riot install it for you.