PDA

View Full Version : Troubleshooting steps... FPS inconsistency


Duper
02-11-2005, 04:56 PM
If I have problems getting my A4 to fire at the same fps (varies by more than 20 sometimes), what steps should I go through to isolate the issue?

Example:
Step 1: Check the xyz for leaks
Step 2: Oil part abc
Step 3: Check for little green gremlins inside the barrel
etc... etc...

Thx...

Deep Sixx
02-11-2005, 05:08 PM
Use better paint. Match barrel to paint. Clean/oil your reg.

sixx

Duper
02-11-2005, 08:33 PM
I started combing through the manual some more and found a section on this in the Appendix "Velocity Variations"... paint is the first culprit but I'm using Chronic which I hear is a pretty good match w/ the A4s. I serviced my tank Reg (which had a minor leak before which is now gone after the service).

The manual says to check the mini-reg, the bolt, the LPR, dwell and then the RAM....

Basically, tear your Angel apart piece by piece and sevice everything but the trigger till you fix it. ;) :bigok:

gc82000
02-15-2005, 03:55 AM
and I bet it will get it fixed :watchout: