O ring Problem and Newton Upgrade

[Chris777]

Can all those who wish to receive their FREE new moulded cup seal please contact Gordon through sales@evolvepaintball.com, in order that we can organise replacement parts.

If you wish to upgrade to the smaller volumiser at the same time you should mention it when you contact us. The upgrade cost to old style Newton users will be $35.00, well below cost, and if you order it all at the same time, we will cover the postage.

Cheers

Chris

[sharps990]

great

email on the way

sharps

[Crazy Train]

I've emailed several times over the past few weeks and never got a response.

[Chris777]

I've emailed several times over the past few weeks and never got a response.

Gordon has followed up every email he has received - try again on sales@evolvepaintball.com

cheers

[Crazy Train]

Gordon emailed me back this time. Thanks Evolve!

[Trigga Nometry]

Since this is a replacement for all those who bought the older, longer volumizer kit, maybe a mod could STICKY this thread.

Just my $0.02

[thog94]

Done, hope this helps out anyone that has this problem.

[KEN CRANE]

guys, chris from evolve has reopened up our line of communication so we will be doing the best we can to help out.

[jkocovski]

wohoo... this are really good news. hope i receive the replacement and off course the new voluminizer soon ;-)

[El Pirata]

I never received a reply from an e-mail but I did receive replacement o-rings while I was waiting for the new seal to be finished.

[Juggernout]

I recieved the spare parts I ordered + the new cup seal !

Paid on monday recieved the parts on friday !

thx

edit: finaly I got my cam to work !

[sloppy75]

i also tried a few e-mails but got no response yet. My gun is pretty much dead after evolving it-oring busting after every hopper. hopefully someone would respond.

[Chris777]

What address are you sending these e-mails to? Gordon assures me that he had replied to every e-mail he has received.

Sales@evolvepaintball.com or gordon@evolvepaintball.com, he answers every one of em.

[sloppy75]

What address are you sending these e-mails to? Gordon assures me that he had replied to every e-mail he has received.

Sales@evolvepaintball.com or gordon@evolvepaintball.com, he answers every one of em.

I have been sending it to Sales@evolvepaintball.com but i just send another mail to the other address.
If i don't get response from him in couple of days, can you help me ordering one, chris?

[Chris777]

Yeah of course. Just send me your details and i'll sort it out

[KEN CRANE]

ok guys, gorden and i have now rekindled our relationship and assures me that this issue has been resolved. i will be more than happy to help out with gorden if you have an issue. after speaking to gorden many times in the last few weeks, they want to make sure that evolve has happy customers.i have tried to avoid getting involved with the evolve thread but i will say this now. i have installed many of the new evolve lpr adjuster cap and evolve exaust side kits and after the tuning and set up, they rock. its just my 2 cents. if any one is intrested in purchacing or having their kit installed correctly just drop me a line as well as bob from fixmyangel.com

[Chris777]

I have been sending it to Sales@evolvepaintball.com but i just send another mail to the other address.
If i don't get response from him in couple of days, can you help me ordering one, chris?

Have just spoke to gordon and he has highlighted the fact that he has a list as long as your arm of all the e-mails that have bounced back to him because of invalid addresses. If he has no other point of contact that leaves him unable to get in contact. If you do not get a reply at any time, PM me directly with new contact details and i will pass them on.
Cheers

[hell's angel]

Is there a performance difference between the two Evolve volumizers (short and long)?

[Chris777]

Is there a performance difference between the two Evolve volumizers (short and long)?

No theres not

[hell's angel]

No theres not

So what was their reasoning for changing to the short volumizer and not sell the long volumizer anymore?

[Crazy Train]

Perhaps it's easier to manufacture? I personally like the shorter one much more.

[Chris777]

Perhaps it's easier to manufacture? I personally like the shorter one much more.

Yep. Shorter. Easier to make. Looks much better.

The old one was once described as if it was worn by madonna.

And although very marginal - the less mass you are throwing about the less energy required to do it - so greater efficientcy.

[hell's angel]

I see, thanks for the info.

But actually, the newer set-up with the lpr adjuster cap and the volumizer being the same length, it now looks more like one of Madonna's bras.

[Chris777]

I see, thanks for the info.

But actually, the newer set-up with the lpr adjuster cap and the volumizer being the same length, it now looks more like one of Madonna's bras.

Doh

[kakayo]

let me see if I can post a pic of mine, and you change your tune about yours. I've been meaning to send one to peegee, so i'lll do both at the same time. I had to make some parts at a machine shop, but its just wrong. but it works awesome.

[kakayo]

let me see if I can post a pic of mine, and you change your tune about yours. I've been meaning to send one to peegee, so i'lll do both at the same time. I had to make some parts at a machine shop, but its just wrong. but it works awesome.

ok, they're not too good, crappy
http://www.angel-owners.com/attachment.php?attachmentid=32710&stc=1
http://www.angel-owners.com/attachment.php?attachmentid=32711&stc=1
http://www.angel-owners.com/attachment.php?attachmentid=32712&stc=1

[kangaroodent]

ok, they're not too good, crappy
http://www.angel-owners.com/attachment.php?attachmentid=32710&stc=1
http://www.angel-owners.com/attachment.php?attachmentid=32711&stc=1
http://www.angel-owners.com/attachment.php?attachmentid=32712&stc=1
:O
Bravo, that's pretty cool.