halo intellifeed instructions

[rippoff]

see the attachment for instructions.

[p8ntbllr2001]

awsome

[logo]

do u need the intellifeed wires if not what guage wires did u use

[AngelFourKid]

Damn dude sweet diagram and instructions, I might try this soon on my halo! :bigok:

[mixar]

http://www.angel-owners.com/showthread.php?t=34460

[fife]

see the attachment for instructions.

Like this is new news? It's always been basic electronics, it's who wants to do it themselves or save time/hassle and pay someone to do it?

[DarkRipper]

No need to be a dick to richmond riot, they're just making a living like the next guy.

[anjordan77]

like i've posted before, we return the boards and use the eye wires for wiring to save in cost...i'm selling the kits now for all the do-it-yourselfers.

we were getting the intellifeed cables for 35+ ship from certain places on the internet which sucked and the radio shack part is about 5$ after tax. so 40$ in our cost plus we gave most everyone their board back i believe. and we had to pay shipping to you the customer.

anyways, i offer the kit with directions for 40$ or 35 if you want to follow this diagram which is pretty accurate...we don't use the switch he's talking about though. and i have a bunch of stuff sitting here and i have our directions nice and purty for ya...but whatever you wanna do.

[sharps990]

i wounder what the diffrence between this and the product that the MT's will be releasing (soon, oh god let it be soon) and the other products that are currently out now that hook up your halo to your gun

sharps

[Marecki]

wher in the fly board its place to conect intellifeed ? a see only eye, batery, selenoid port , one free selenoid port

[anjordan77]

it's a HOP port on the board. the master techs have been claiming they are going to release this for the past year. i don't doubt their thorough testing of all their products but i am starting to doubt they'll make one.

[ksfdl]

quick question- where does the wire connect to the gun from the halo?
does intellifeed work on 05 speeds?

[anjordan77]

does not work on 05 speeds.

[flyguy4]

were is the port at?

[flyguy4]

i have an angel 4 fly ....... were is it

[Identitycrisis]

to the right of the SOL port and to the left of the BAT port.

[Scott7d]

This may seem very very stupid and I could be way off, but in that photo, it says it can run on a 9volt or 6 AA's, I thought when you use intellifeed, it uses the gun battery to turn the halo on what ever you program (run on every shot, run every 2 shots ETC)

[DarkRipper]

This may seem very very stupid and I could be way off, but in that photo, it says it can run on a 9volt or 6 AA's, I thought when you use intellifeed, it uses the gun battery to turn the halo on what ever you program (run on every shot, run every 2 shots ETC)


On the halo it's set up to run off the spin commands sent by the Angel board, but uses the batteries within the hopper to actually power itself.

[DarkRipper]

it's a HOP port on the board. the master techs have been claiming they are going to release this for the past year. i don't doubt their thorough testing of all their products but i am starting to doubt they'll make one.


I'm thinking it may be because the G7 doesn't have the port, and the 05 doesn't for sure...

Too bad, intellifeed is still a viable concept, particularly with these new 15 bps rules.

DR

[Scott7d]

Ah, nice.
Thanks for clearing that up.

I'm guessing this set-up is ridulously fast.

[DarkRipper]

Ah, nice.
Thanks for clearing that up.

I'm guessing this set-up is ridulously fast.

If I could get it to work without crushing paint, I think it would be.

/shakes fist at halos in general

[mixar]

i was reading up on this other mod on pbnation at http://www.pbnation.com/showthread....t=&pagenumber=5
and i was thinking for those trying to get the hopper to have a smaller spin time, try using a different gear ratio to make it not turn as far

[DarkRipper]

I get a 404 error when I click that link, Mixar... what are they doing to mod their Halos?

[anjordan77]

well when the link worked...it was basically talking about getting a different motor and gears...

[DarkRipper]

I need to try greasing the belt like we discussed first...

That'll probably do it.

[mixar]

http://www.pbnation.com/showthread.php?s=&threadid=819856&perpage=21&highlight=&pagenumber=5

should work now

[Jorell1000]

Really, this is useful.