Tell me about the parts???

[Paintball is Life]

OK I am getting a used Ir3 with ups and I am not sure what some off the parts are so. I am going to list most of the ups and stuff on it could some of you guys and girls tell me what each part does and how to keep it in good working order.just some basic info about the part I guess Thank you
Robert

here is the Ir3
Angel Ir3
A4 board
Warped Sports breach knob
Softface bolt
Dye volumizer
2nd detent
Custom made trigger (Slayer-like for the A4)
Snatch grip
12 inch 2 piece CP barrel with 2 backs

That is alomost everything it has on it.

[JDemonpbt]

The only performance inhancing ups you got is the A4 Board (stock in Angel A4's, and will increase your ROF to 25bps instead of the 20bps in the stock IR3 board) and the softface bolt (which has a small piece of rubber on the front of it, to decrease the chances of the bolt chopping a paintball). The WS breech knob is just for looks, the Dye volumizer, is also the same way, however the ideal of the volumizer is to lower your LPR by adding more "volume" of air into it. This ideal really doesn't work on IR3's and other Angels made before the IR3. On Speed's and newer Angels it does. The 2nd ball detent, will just help keep the ball inline for the bolt a little bit better, helpping the achive faster Rof's. The Snatch grip, is a claw looking thing behind the grip frame, to help you carry your gun, when not playing. Alot of people have them, and think they look cool. Be careful w/ the custom made trigger, alot of people like to buy/ or make after market triggers because they sometimes will help you achive faster ROF's, but it all depends on how you like the trigger, and the "feel" of it. I personnally use a Lasoya trigger in my IR3 and its better then my stock one, IMO. Your barrels, are just after market ones, and have two different bore sizes. Other then what I said, it sounds like you got a good gun, so injoy.

[Paintball is Life]

Thanks a lot that is exacly what I wanted to know. Sorry I put the second detent and barrel on there I knew what they where. I think he had the second detent cause he had a halo on it. the trigger shou;dn't be a problem cause I am using a 98c currently and it will be a mager step up from that so speed is not my issue right now.
And I have one more question.
What should the Ir3 be set at cause I know there are different settings for all the parts on there just name some I guess IDK.Thanks Robert

PS- If you can't tell already I am new to angels and High end guns so...basic info would help that Ishould know

[JDemonpbt]

keep your dwell (thats the electronic 14way valve) at 14. That means, your 14way opens up every 14 milliseconds, when you pull the trigger. This is the default setting, and you should only adjust your dwell if you want to fine tune it to your paint,barrels, and hoppers, etc. Set your COPS at 11 sen, 20 bas. Thats usually ideal. Check the manual for how to change settings.