board sticking

[paintball0708]

a few weeks ago when i was playing my angel A4 had a problem with my trigger going out of adj. so after each game i had to re-adj it through the frame grip and trigger its self, so when i got home i took it apart and put some lock tight on the trigger adj. pin threads to stop it from coming out of adj that way and went to go to re-set it to get my fine tuning down again and i noticed that my board was sticking when i hit the trigger again and i had to pull the trigger back forward to stop it from sticking. is this a sign of my board going out or how can i fix this problem??????

[angelover]

This doesnt sound like a board problem. Sounds like ur leaf spring was bent. What exactly do when you took ur trigger out? Make sure you put some grease on ur trigger to and clean all the dirt off. Also make sure that the trigger is in the correct position

[paintball0708]

the trigger and everythin is back into place. so as for it being bentdo what just pull it out a little????

[logo]

look at the leaf spring( the little lever on the board were the trigger make contact) and see if it sticks when you push it in. if so i would clean it out. It most likely has gunk on the inside thats makin it stick, just be careful

[paintball0708]

i cleanedit out and its still sticking so now im just gonna send it in to pro shop and get it fixed that way thanks for all the info you guys gave me!!!!!

[biglouz11]

make sure that every thing is in the right place and see if everything is thight i no it does not sound like a board problem