Morlock'd Fly

[vic]

Ok, so I'm taking a mini-morrlock and putting in in my fly, it will run off a 9v and the Fly solenoid. I will post new pics when I am done. Post opinions/comments/questions.


Thanks, Vic.

[FrontManDan]

you going 2 have 2 do it a bit differently as the morlock doesnt have a onboard trigger switch.

how come your changing your fly board for a morlock?


This is how i did mine pic (http://www.angel-owners.com/attachment.php?attachmentid=17609)

[vic]

See, I wanted the unlimited (basicly) ROF, new modes, a littel light gun. Plus I got a deal for the morrlock. I'll let ya know how it comes out.

[Sparco]

I'm curious though, how much faster will the Morlock enable the marker to shoot? In the end you'll still be limited to the rated speed of the loader. Plus with tournaments beginning to crack down on ROF, the need for "uncapped" ROF might be a thing of old.

Plus, I've yet to find someone capable of outshooting their Fly. Even with the 31bps board cap.

[smasher41]

have fun burning out your eyes with the morlock board.
it pumps 5 volts to the eyes, where the stock eyes are rated for 1.2 volts, and a MAX of 1.6. within a min or so your eyes will simply burn out.

youll have to doe some inline resistors and such to lower voltage or amperage, i cant remember :P

[corrupt123]

besides saved weight, which really wont end up being much, i cant see any good reason for replacement.

but good luck.

[ritualpuke]

How can there be so many ignorant people in the world?

[smasher41]

Hey guys, STFU about changing the boards.(not directed to any one person) If he has the money, and He wants to do it, let him, does it affect YOU any?
Not EVERYONE likes the same thing ya know. Just remember, there are people out there that dump $300 plus on anodizing, which does NOTHING but change looks.


This forum is for helping people with question/ ideas, NOT for your opinion of what others should do.

[AngelBoi]

This forum is for helping people with question/ ideas, NOT for your opinion of what others should do.

............eh?

Post opinions/comments/questions.

pwned lol

[smasher41]

I think he was refering to 9 or should i say how to) the isntall, and how he was gonig to do it. not wheter or not to isntlal the board.

[tman-89]

I think he was refering to 9 or should i say how to) the isntall, and how he was gonig to do it. not wheter or not to install the board.


I agree. We should help everyone that comes on here, not bash them because you think their ideas are stupid. I think the idea of swapping parts with other guns may be unnecesary, but it is still fun. Hey man, if you can make it happen, great.

[vic]

:blasting:

Ok, I'm not sure how much the morlock will increase the ROF. Lets say the marker can cycle 35. The fly board is capped at 31, that would mean a 4 bps increase. I cant shoot 35 bps on semi but on full-auto(which my local field allows)techinically I should be able to hit 35.

I have a halo with Victory board, I have clocked it in at feeding 39 bps, I hardly think the hopper will hinder my ROF.

I know that the fly board is nice, I liked mine alot.

I know two people that put morlocks into their guns (shocker, raced cocker) and they have seen a great increase in rof, whether it be bouncing more or ramping.

I also like the fact that I can change literally every aspect of the gun just from the board(debounce, settings, etc)

I had an opportunity to trade my fly board and battery for a Mini-morlock and a freeflow cocker body with pnumatics. The way I figure it is I get the same if not better ROF and get a cocker body out of the deal. I'm sure most of you would do that.

The extra modes on the morlock(turbo, autoresponse, full auto, etc.) are things that I have always wanted to mess around with. I understand that they are not legal in tourny's. The morlock has a tourny lock dipswitch that will enable me to have my gun completely tourny legal.

The weight loss isnt much, but hey it is a plus to getting the board huh? One disadvantage I think that the fly has is it's rechargable battery. While it holds a long charge, I would like to just be able to pop a 9-volt in and not have to worry about charging.

Smasher, I was not aware of the rating of the fly eyes. I will probably end up getting some normal breakbeam eyes that are rated higher. I thank you for that.

I thank those of you who tried to help me and did not flame.

Thanks, Vic.

[AngelFourKid]

Let 'em have it Vic :devil1:

[Picasso101]

:hitit:

[usa11220]

im almost posetive that the fly board is uncapped and that the v35 will not do 39 for a whole hopper

i had one in my halo and i still chopped on ocasion with a mrof set at 25

ihalo all the way

[vic]

Fly board is capped at 31 dude, do your homework.

I don't care what you "think" I used a friggin stopwatch and clocked it in.

[AngelFourKid]

im almost posetive that the fly board is uncapped and that the v35 will not do 39 for a whole hopper

i had one in my halo and i still chopped on ocasion with a mrof set at 25

ihalo all the way
The Fly board is capped at 31 bps, do your homework. Thats something special about the MT Force Flys, they have uncapped firing rates. You are correct about the v35 halo, it will not feed 39 for a full hopper. It would only do that if full spring tension was kept on the drive cone, and as we all know, thats practically impossible while your unloading a full hopper.

[usa11220]

The Fly board is capped at 31 bps, do your homework.


and i quote (from the Fly manual) "The ANGELs MROF with Angel Eyes is non-capped at 31 BPS."


so now your both wrong :owned:

[smasher41]

how the heck is it "non-capped" and at 31 bps..... i think thats like using a double negative in a sentence.

[usa11220]

i think they are trying to say that it scans the opto mechanism and eyes an infinate amount of times, so in essence it is uncapped, but 31 is the fastest they have got it to cycle, its too bad the angels dont have the setings like vikings or sumthin to c how fast they can really go

[whiskeybusiness]

how the heck is it "non-capped" and at 31 bps..... i think thats like using a double negative in a sentence.

I agree and always wondered about this when reading the manual.

[Picasso101]

The fly board will not shoot over 31 bps therefore it is capped at 31. If any off you get a video of you shooting your angel with fly board shooting over 31 bps I will send a $20 MO to you....100% serious (thats all the money I have.)


Note you must have a video of you turning it on....then shooting....then showing a chrono read 32 or more bps. You also must show in the video the board (open up the grips).....

[logo]

the balls will probably start colliding into each other by then but i would also love to see someone do this, or maybe your gun will just explode either way it would make an awesome video :night:

[Picasso101]

Its not even that I want to see it its just that it can't be done....

Seeing it would still be cool.

[RaistlinsLegacy]

ummm doc nickle did get an 04 speed shooting 35 with a morlock board....

[usa11220]

thats sweet, u have a video?

[flyguy4]

flash the board and reprogram it and then there is no lemmit to what you can do..... the vic halo yes..... the i halo no

[AngelFourKid]

The fly board will not shoot over 31 bps therefore it is capped at 31.
Thank you. Despite wtf the manual says, it realistically can not shoot over 31, so as my good friend Picasso said, face it, it is capped. Im done here.

[logo]

he is pretty much right, and no person really needs to shoot 31 bps or higher and the balls will collide and it will explode in your barrel and that will be the end of u shooting check the vids on angel service center hes only going like 27 and they are blowing up all over the place

[smasher41]

yep, my fly will hit 30 on the rof coutner almsot everytime if i set it up to rip, but it gets a lot of balls blowing up either at the tip of the abrrel or right as they make it out the barrel, its crazy stuff. shame i have to sell it, i hate being poor lol

[Picasso101]

The counter on the angel lies.

[vic]

Like seriously, the fly counter lies really bad.

[Paintballjc]

Well, no matter if a board is capped or not... It will only shoot as fast as a loader will load, and i have never seen a halo, or any loader, load faster then 30, and that was when it was intellifeeded. So even if your cool new board is "uncapped" it really doesnt matter, because its never going to shoot over 30 w/o problems because loaders arent fast enough, and paintballs arent aerodynamic enough.

[dr3x]

for all you pple who need to shoot over 25 or even 31bps,
might as well modify a potatoe gun to accept a 140 ball pod and just shoot that.

[smasher41]

Like seriously, the fly counter lies really bad.

yes i know, but its very damn close to being "capped out", even the red chrono was registering 28, I need to get a hold of those pact timers or whatever they are.
the guns basically goes as fast as demo mode, but with paint. :P

[Picasso101]

It goes about 28+- in demo mode.

[logo]

hey Smasher how much 4 ur fly

[dalau]

Vic: I want to do the same thing with my Force Fly! Have you figured out what to do about the eyes yet? It'd be an awful shame to mill larger holes that fit traditional IR sensors...of course WDP had to use the most obscure eye elements to thwart all us tinkerers!

[vic]

Nope, haven't really looked too much at the eyes... but I am assuming that I am going to have to mill it a bit :notsure:

Glad someone is as interested in this as I!

[CapeCodPBteamXP]

ive seen balls colide in the air b4...and vantage tes on this site has to i was tehre when he was shooting it he set up the gun it was sick....im sure he remebers it

[Picasso101]

Why wpuld anuone need to shoot fast enough so balls collide in the air?? Ive never seen this happen and Ive seen and shot gun that are very danm fast.

[paintreliever]

im thinking about predatoring my fly soon...i like the fell of the microswitch and ive always like the way they do business there, and i can get a discount..so its all good

[Picasso101]

Do buisness were??

[paintreliever]

tag

[Picasso101]

oh...he and I started it and hes having one of our friends finish it.

[vic]

Should be done sometime.... we hope. *cough rob cough*

[Picasso101]

Once you give it to him........

[vic]

Ok, I'll be getting my gun tomorrow, I'll post up a vid/pics.