Rasta Dont want to ramping

[WDP ir3 2k3]

Hello Guys i got a quston about ramping when i put my rasta at 22TR it dont want to ramp my firend got a fly and when he put tr at 22 it goes insane

Thxs kyle

[AngelFourKid]

What version software do you have and what does he have.

[smasher41]

not all guns are created equal :)

check your lpr, make sure it is at 70ish and does not drop off below 30 psi when shooting it.

[paintreliever]

mines the same way...lpr is at like low 70s' high 60s'..

[smasher41]

pop ur guage tool on it, checkto make sure its not dipping below 30psi.

BTW, i am assuming your saying its not really ramping/ bouncing because its not going any faster, is this correct?

[Owned13]

my fly is pretty much the same way, tr at 22 dwell at 12... still waiting for my angel tool kit so i can check my lpr... max bps i'm getting is 18 =/

[paintreliever]

i have just assumed that i have that bps problem..
so i charge it and i still couldnt get above 18 or something..
i have 3.5, waiting for 3.7 to come out to the public

[WDP ir3 2k3]

What version software do you have and what does he have.


3.6

[WDP ir3 2k3]

My LPR is set at 55 should i higher it?

[smasher41]

Well, I has the same rof u guys were getting no matter what ( 17), and talked to ken and it turned out my lpr was pooped out, now the scukers is shooting 30 on the lcd and 24 over a red chrono.

he suggested checking the lpr, if it dips below 30 psi it could be bad( slow recharging)

also, make sure you clean out ur mini reg and such before assuming its a pooped lpr.

[WDP ir3 2k3]

What should i set my LPR at 65?

[smasher41]

70.... as close to at least.

[corrupt123]

so let me get this straight, when you turn up the bounce (most reads per pull) to 22, the maximum setting, you ramp.

and you're wondering why? just turn it doen if you want it to stop. TR1 or TR2 is prime, but i'd say you're probably ok up to 4 or 5 just practising, keep it toned down for tourneys though.

[smasher41]

I think they are saying their guns arent shooting any faster even with tr set to 22.

unelss its their hoppers simply cant feed fast, then it could be some settings thatneed tinkering :)

[AngelFourKid]

*cough*lpr*cough*

[Kazer]

corrupt, you have it backwards bro. Higher the TR the more the ANTI-BOUNCE filter. Your TR1/2 is promoting bounce because you lowered the filtering of it.

[corrupt123]

not on a fly, and i'll bet you money (unless im just misunderstanding you)

if you're shootin an A4, that thats correct. to reduce the bounce, you turn up the TR setting, therefor, having a higher amount of filtering for the pull's. On a fly, lower TR settings = higher filtering, in turn, less bounce.

:)

[WDP ir3 2k3]

not on a fly, and i'll bet you money (unless im just misunderstanding you)

if you're shootin an A4, that thats correct. to reduce the bounce, you turn up the TR setting, therefor, having a higher amount of filtering for the pull's. On a fly, lower TR settings = higher filtering, in turn, less bounce.

:)
:biggthump

[Owned13]

higher tr on a fly = more bounce, opposite of a normal a4

[paintreliever]

how can i clean the lpr, if i even can? or should i buy a rebuild kit for it

[SNiPE]

u have to change yur mode to ramp (i think it is mode 4 or 5) and then it will ramp end of discussion...not to sound mean or anything.... :cheers:

[WDP ir3 2k3]

u have to change yur mode to ramp (i think it is mode 4 or 5) and then it will ramp end of discussion...not to sound mean or anything.... :cheers:


in mode 1 i mean i got tr at 22 and it wont go as fast as flys iv shot befor

[AngelFLY04MASSIVE]

Did you try to just play with your fly right out of the box. If so than of cource your gonna have problems with your lpr. No gun is game ready right out of the box anymore. You probubly need shims taken out. Also, why would you buy and Angel without getting the tools that are needed to service it. Set up ur reg and start rippin. Tr 22 should put you well over 25 if you have fast fingers. Im moderatly quick with my fingers and I can hit 28 easily when i put that setting on. 24 pbs on TR 2.

P.S. "PAINTRELIEVER" READ YOUR MANUAL. YOUR LPR CAN BE SERVICED/CLEANED

[SunTzu]

maybe its a hopper related problem
did you have the hopper set a sfast?
what hopper are you using?
long dwell times can also affect MROF, I changed mine from 11 to 9 and it was a real noticable difference

[WDP ir3 2k3]

maybe its a hopper related problem
did you have the hopper set a sfast?
what hopper are you using?
long dwell times can also affect MROF, I changed mine from 11 to 9 and it was a real noticable difference

Hopper im uesing is halo b with zcode hopper seting are at sfast and dwell are 11 and MROF is 25

[AngelFourKid]

I like to operate my gun on dwell 9, it seems much faster, while keeping efficiency top notch and not having trouble with paint/chopping.