chaos install

[FrontManDan]

UPDATE
Heres the video of the first time i tried it out


http://www.jayloo.com/files/vids/800/angel1_512.WMV (http://www.jayloo.com/files/vids/800/angel1_512.WMV)

What do you recon, i think thats proberbly about 17-18bps which makes sense because its just a standard HALO.

:-the vids on JAYLOO so you will have 2 sighn up but its worth it


ive almost finished a replacement HALO board that will bury all other contenders :evilgrin: which will proberbly include the Ihalo when its released, ill keep you posted

----------------------------------------------
finally got the pics of my chaos ace install, check them out

DRILLING
http://img.photobucket.com/albums/v729/frontmandan/Dscf0001.jpg
http://img.photobucket.com/albums/v729/frontmandan/Dscf0002.jpg
http://img.photobucket.com/albums/v729/frontmandan/Dscf0003.jpg
http://img.photobucket.com/albums/v729/frontmandan/Dscf0004.jpg
http://img.photobucket.com/albums/v729/frontmandan/Dscf0005.jpg
http://img.photobucket.com/albums/v729/frontmandan/Dscf0006.jpg

eyes installed
http://img.photobucket.com/albums/v729/frontmandan/050208032.jpg
http://img.photobucket.com/albums/v729/frontmandan/050208022.jpg
http://img.photobucket.com/albums/v729/frontmandan/050208012.jpg
[/url]
http://img.photobucket.com/albums/v729/frontmandan/050208001.jpg
http://img.photobucket.com/albums/v729/frontmandan/05020804.jpg


i havent put any eye covers on yet, im currently trying to make some with fibreglass, if that doesnt work then ill put some eblade covers on.


ill try and get a vid the first time i play with it


me and my mate are also working on a replacement board that will allow me to have an LCD again, so far we have a working board with eyes but no LCD.

what do you think?

[Paintball is Life]

nice

[Toolow]

Definently more technical than me. Good job.

[FrontManDan]

update

[WDP ir3 2k3]

Looks good :evilgrin:

[Spike Spiegel]

was that a 2k4 chaos board you installed?
if so can you send me a copy of the wiring diagram?
ive got the one for the 2k2 but i was told its different for the 2k4...
thanks

[FrontManDan]

http://www.icdownersgroup.com/start.html

click on technical then click on harness pinouts, i used the 12pin pds bko/defiant diagram

[amelot]

how did you install the microswitch

[FrontManDan]

On a little bit of plastic that is screwed onto the original top board hole.

[nonamifrontman]

I noticed a hole in the grips on the left side... what's that there for?

[FrontManDan]

its a hole for a second switch so that you can turn PDS on and off, you can do it in the software as well, you dont have 2 have it but i put in anyway

[nonamifrontman]

That's what I thought I jsut wasn't sure... Do you have the measurements for where the eye holes go? My Morlock board will be in tomorow for my LED and Ill be able to install it later in the day...
How are the Fiberglass eye covers coming along?

[FrontManDan]

That's what I thought I jsut wasn't sure... Do you have the measurements for where the eye holes go? My Morlock board will be in tomorow for my LED and Ill be able to install it later in the day...
How are the Fiberglass eye covers coming along?


theres is info on the tag forums but it appears to have disappeard, if i get time tommorow ill measure it off mine.


I abandoned the eye cover project, couldnt get the covers 2 look the same, youve got 2 be nifty with a dremel to get anything that looks nice.

[nonamifrontman]

If your still thinkin about the fiberglass ones... if you have a Dremel router base you could cut out the shape you want onto paper, copy that onto the fiberglass and then cut them with the dremel. That should give you almost exactly the same covers. Now that I think about it, I might try and make some out of fiberglass (make them similar to the Eblade covers) and let them take the shape of the side of the body.

I'm gonna try it and post pics of how Ill do it and how ti works....

[FrontManDan]

you need 2 drill the hole 66mm from the front, on the groove closest to the top.

im not sure if this is the same for the LED.

[Spike Spiegel]

well if you need i can be hired to make the eye covers on a cnc (im a certafied machinest/airsmith and have full access to a nice fadal cnc)
lemmie know if youd be interested

[amelot]

any pics of the inside grip. Having problems cramming harness battery and board in frame.

[FrontManDan]

lost camera, sorry

[Tormenter554]

here you go 1.battery goes under switch i recomened wrapeing the battery in black electrical tape to avoid metal contact with board 2. put some foam in the left side where theirs a empty space between the battery and the body to avoid movement 3. now put the chaos board face down onto the wraped battery with the prongs over the plastic 9 volt connectors4. cut out a piece of foam and put it ontop of the board to avoid board movement now close and go play