is posible dissamble the brench block?.

[miguel]

hello I need some help.
is possible to dissamble the angel brench block ?.
of which way I can disassemble brench block?.
thanks you very much for your help.

[RonnyMcDYO]

its the breech block and yes you can get it off the gun. The LCD solenoid screws fit in the back end of the rods that hold the breech in place. Problem is you destroy the screws when you do this and the only thing they will be good for at that point is removing breech rods. As far as the size of the threading you need no idea I havent gone and looked yet.

[Neutral Action]

Yes, as Ronny said it is possible, but the screws which are needed to thread into the breech rods themselves were only incorporated into the LCD(not the IR3) so do not take you solenoid screws out thinking they will work, now there are two options, one they sell the screws on FixMyAngel Here (http://secure.fixmyangel.com/catalog-product343), or you can head down to your local hardware store and look for a Machine Screw 2mm diameter(i think) and more then 15 mm in length, good luck

Can anyone confirm that size? I believe thats the one I use