PDA

View Full Version : Battery Or Problem with eyes?


tmoney1
02-02-2005, 06:04 PM
Ok, so i went to shoot my fly the other day, and with eyes on it would shoot the first pull, then would not shoot for the next few pulls, then it would shoot again etc.
So i tried shooting with no paint, but with the eyes on....and the same thing happened...
the gun works fine with the eyes off...
it also has not been charged for about 25,000 cycles...

SO is it the battery that needs to be charged or is it a problem with my eyes

ALSO my eyes are clean and same with the rest of the gun.

tmoney1
02-02-2005, 06:29 PM
any one?

Sparco
02-02-2005, 06:51 PM
Wow, expected a response in under 25 minutes?

Why not give it an overnight charge? Can't hurt anything.

vic
02-02-2005, 08:18 PM
I'd put my money on the eyes. If charging does not work, check out your eye ribbon. Maybe it got cut in some way. If thats the case you could buy new eyes.

paintreliever
02-02-2005, 08:43 PM
i second that

tmoney1
02-02-2005, 08:59 PM
the eye ribbon is fine, i but i am still waiting for the charger, i got this gun in a trade and he forgot to ship the charger so im still waiting for it...

vic
02-03-2005, 03:43 PM
Give it a charge, if they still dont work your eyes are messed up, buy new ones. Are you SURE your eyes are clean? They should work if your ribbon is intact.

tmoney1
02-04-2005, 06:08 PM
Ok, It seems that the person i traded with was taking the eyes out by using an allen wrench to pop them out, this made marks in the eyes and they now don't work. So i am buying new eyes.

Thanks for all your help.

paintreliever
02-05-2005, 12:46 PM
what is the easist way to take the eyes out?

AngelFourKid
02-05-2005, 12:51 PM
I use a small allen key, never had any troubles with my eyes. Better than trying to pull the eyes out and breaking the ribbon.

Sparco
02-05-2005, 12:52 PM
what is the easist way to take the eyes out?

Remove both detents, take a 1.5mm wrench and gently push the eyes out through the open detent hole.

tmoney1
02-09-2005, 08:30 PM
Remove both detents, take a 1.5mm wrench and gently push the eyes out through the open detent hole.
thats what ruined my eyes...if u just need to clean them used cannedair

flyguy4
02-16-2005, 12:45 AM
thats the exxact samething that happend to me and my eyes were clean and everything intact change paint to like the best....evil.....or ever menace and see if it works because i put some old field paint in and it would do the same and then i poured some evil in that bad boy and she flew just like i thought so try the paint and if not then i dont know talk to these crazy guys

PakmanRevd
02-18-2005, 04:44 AM
My eyes just brokeded too :(

G7 eyes tomorrow :D