GUN LEAK!! need help gun has to be rready for tomorow

[Bumble_Bee]

Hey guys, when i air up my gun it leaks, it sounds like it is coming somewhere in the middle of the gun and i cant feel where the air is coming from. So could someone please tell me what to do to fix this so i can play tomorow?? thx

[firemedic30]

On what side in the middle??

[firemedic30]

Also, give me more info on your set up...

HPA vrs LPA?

DWELL?
LPR?

[Bumble_Bee]

it seems in the middle, kind of by gage.


setttins are not stock,they are what one of the guys postted


Dwell: 11 (factory default, no changes yet)
TR: 1
LPR 1st way 75
LPR manuals way 80
Semi 2

[firemedic30]

Are you talking at the top of the mini-reg? By that guage?

[Bumble_Bee]

yea

[firemedic30]

What you need to do is take the mini-reg off of the gun and see what that ORING looks like!

It my be torn or damaged.

OR... just dislodged.

Put some grease on it, re-seat it, and air it up!

[firemedic30]

Before that...question, can you feel the air from that little hole??

[firemedic30]

Sorry about that, you already answered that.

[Bumble_Bee]

The orings fine, and with the mini reg off and blow in it where it screws in, u can hear the air coming out o somethign else

[angelover]

I had this problem. I hope its the same problem. Take your gripframe off, and then look at the angel body on the bottom. Now there should be a blue plate with a rod in the middle of it going up into the gun. This is the gas diverter plate. I accidently forgot to put mine in and my gun had a look that felt it was coming from the gauge/mini reg, but it was acually from the Gas Diverter Plate. Also make sure the orings are good on the Gas Diverter plate (the blue plate). I hope this helps.

[Paintballjc]

I had this problem. I hope its the same problem. Take your gripframe off, and then look at the angel body on the bottom. Now there should be a blue plate with a rod in the middle of it going up into the gun. This is the gas diverter plate. I accidently forgot to put mine in and my gun had a look that felt it was coming from the gauge/mini reg, but it was acually from the Gas Diverter Plate. Also make sure the orings are good on the Gas Diverter plate (the blue plate). I hope this helps.
I had that same problem. I forgot to put one of the orings back in the diverter plate... it leaks really really bad if you do that lol

[angelover]

Yep LOL . Very common mistake. So Bumble_Bee make sure that is all in order and let us know, so we can help you further

[Bumble_Bee]

k, i took the plate off and made sure it and orings were in. I have the small oring that goes around the rod, have the oring that is under the blue plate. Everything is in and working as before i took it off. This problem still happens when i air my gun up. It Leaks from somewhere in the center of the gun. Is there soposed to be only 2 orings by the plate? one around the rod and one before u put the blue plate back in?So if anyone has any other solutions to make this leak stop it would be greatly appreciated.


thanks

andy

[Bumble_Bee]

the leak is coming out of the back hole in the block for sure, prolly the ram. i cant take my ram out yet because i need that special tool in manual or whatever. So once i check the orings on the ram i shall see if it works, or get local field to send back and get new a4

[paiintballer05]

Ram Tool isn't necessary. Take 2 small allens and put 1 in each hole of the ram. Take a 3rd allen and put it in between the other 2. Twist out. Not the best way but it gets the job done.

[g-pimp a4ripper]

cool

[g-pimp a4ripper]

very cool