Leaks...

[Newb]

I have an angel lcd c+c and a max-flo reg and tank. When i turn the gas on there is no leak, but when i fire it starts to leak for about 30 secs. What is the problem and how do I fix it?

[Newb]

1. Im not sure next to the bolt or selenoid.

2. After 30s of each shot

3. Im not sure i bought it used.
4. Very i cleaned it not too long ago

[WarpedKid02]

It sounds like the Exhaust Valve. You might need to get a new one.

[Newb]

Hey i found the problen the Ram wasn't properly put in place and it loved a few drops of nice old gold cup oil. It works a lot better now. But i have another question, when i fire there is a hearible "exhaust" gas type sound that lasts for a bout 1 sec after each shot, is this normal? Help will be appreciated thanks...

[Newb]

up

[Newb]

No, its not the exhaust valve i replaced it and the leaking seemed to get WORSE. I is 90% that it is the RAM, one it didnt do this when i tested the gun out, but when i took the RAM out (not the LPR just the RAM0 any advice

[theflash2k2]

if its the ram its most likely an oring on it could be scratched or torn. try and replace the 3 main orings on it and see if it still leaks

[Newb]

I replaced the o-rings and it still leaks.

[SkeL]

Did you re-oil the rings:puzzled:

[Newb]

I reoiled it and it STILL leaks....:wowzer:

[theflash2k2]

when was the last time it was serviced?

[WarpedKid02]

Ok, first of grease the o-rings. Not oil, grease. If that doesn't work, check for tears, or scratches on the Ram itself. If you can find it, send your Angel too one of the Sponsor's here.

[Newb]

What type of grease? Where can i find it?

[WarpedKid02]

You can get the LoveJuice Grease at any of our Sponsor's.