PDA

View Full Version : flash tank and other issues :cry:


t2zone1
01-23-2005, 08:03 PM
flash tank guage

--------------------------------------------------------------------------------

i have a force fly and i am leaking air from a small hole in the back of my flash tank guage!!

what does this mean??

can they go bad??

also i recently upgraded my software to 3.6 and i have the laser eyes as well, and i am only able to achieve 15bps with the eyes on, and with the eyes off i can achieve 24bps!! before the new software and laser eyes i could easily reach 24bps

all the normal areas have been checked ---- angel is fully charged -loader has new batteries - dwell is set to 10-tr is set to 12-lpr is 55-60-eyes are clean-have tried 4 different loaders and my halo has a victory board?

what else can i do??

Outerice
01-23-2005, 08:10 PM
put the loader setting to sfast.

t2zone1
01-23-2005, 09:28 PM
put the loader setting to sfast.

it is set to sfast

firemedic30
01-26-2005, 07:53 PM
hey TZONE, where exactly is that leak??

firemedic30
01-26-2005, 07:55 PM
If you are talking from the gauge, then check the ORING.

Then check to make sure that the guage is not cracked in anyway.

If all is O.K., just try a small amount of grease on the ORING and it should be OK.