Dazed and Confused

[AngelsRus]

hello evereyone i have a A4 and its chopping hardcore and when it isnt chopping the paintballs are going to the left and right or up and down. i was reading a thread about turning of sensi, how do you know if its on or off? that might be my problem. i have a few other questions:
1.which barrel bore works good for the for evil pipe barrel kit on angel 4's?
2. what velocity should i shoot at that works good?
3. is it the paint?
4. what volumizer?
5.how do you do lpr? is it hard?


thanks for your time, mark

[angel_p8ntba11a]

1)as far as bore size...i use .692
2)velocity should be at around 285
3)it could be the paint....are they chops or breaks
4_i prefer the medium volumiser
5)and to check the lpr...u need the angel tool kit
*aslo what kind of loader do you use

[AngelsRus]

thanks angel p8ntball, i use a empire reloader b w/ rip drive, what about lpr? or did you just leave the lpr it as is?

[knicknak14]

You can tell if sensi is on or off by looking at the back light on the grip. It is green when it is in SAFE and turns red when you put it into LIVE. When in Live check to see if the red light is beeping. If It is, you have sensi on, if not it is off. You can turn it on or off when in live by pushing the middle button (Orange)

[angel_p8ntba11a]

well...I left the lpr as is.....but when i sent my gun for the mag netic mod....they fine tuned it so and i dont have the angel tool kit...so i dont know what it is at...if i were you, i would leave the lpr as it is....and i have read on some of the other threads that halo b's push the balls down to hard causing the ball to break....but do not quote me on that....good luck

[AngelsRus]

thanks knick knack that was my problem sensi was off i never knew you could turn it on and off.

[knicknak14]

hahahhh

no problem... At least you dont have to send it out now :cheers:

[angelover]

Ya .6892 works well. You want 3 sides of pball touching. Shoot at 285. I like to use middle volumiser too and another thing to keep in mind is that guns chop alot more in the winter because the paint size constantly changes. Ya and make sure you sensi is on ;) (LED is blinking red)

[speedmarvelizeR]

haha, the simplest solutions to hard problems