Help! Leak!

[angelover]

I was paintballing today, and all hell broke loose :dunno:! I went to the chrono gassed it up, and then it started leaking like crazy. It seemed to be leaking from the gauge or around the gauge. Its never done this b4, and ive had it for like 5 months. THe only thing that I changed was that I removed the sensi pad, rod and the little blue then that the rod goes into, could this have caused the leak? Anways, I went to the proshop (they are good) and they couldnt fix it, it is all setup right, and all the orings are good, even the gauge, and teh gauge is very tight, I couldnt tell you what pressure I am at because i couldnt see cuz the gauge could function very well with the leak. I cant tell you my setting really cuz my LCD is broken, how I have to adjust is reset to factory and then go up from there lol . Please please please help. Another thing is can someone tell me all the factory settings when I reset the gun, like MROF, TR, Dwell all that. Thanks alot guys. :x:

[Vantage_TeS]

Put your sensi back in. That blue piece is called a divertor plate and you notice that there are orings on it. The main air passage does down throught the middle of the gun. Since the sensi rod has to go UP through the middle of the gun they have the air come down and go around the rod and then back up (you will see the two air passages if you look where the plate and rod came out).

If you made a block or something to fill the gap where the sensi pad came out of the trigger frame then you could put just the divertor plate back in.

Easiest thing is to just put the whole thing back in.

[angelover]

K ill try it but, im talking this is a huge leak, as soon as I turn the gas on the air just starts coming out very strong.

[angelover]

Vantage_Tes you were correct. Brilliant man you are :clap: . Unfortunaly stupid me lost my diverter plate and I cant find it. Is there anything that I can put in there to replace it until I get a new one? Thanks alot

[red_alert102]

speaking of that plate, i took it out because of a paint mess...when i try to put it back in, it doesnt want to sit there. The side opposite the flash tank just kind of hangs there. Does it even matter though, since it seems it is just pushed back up when i put the trigger frame back on.

[thog94]

Just make sure that you have both o-rings in there. Once you tighten down the flash tank and grip frame you should be good to go.

[red_alert102]

cool...thanks

angels actually make sense...i love it