paintballpattt
01-15-2005, 09:58 PM
--- i have a big problem with my 2k2 Angel LCD.
I got it used from a guy i know and i shot and used it before i bought it for myself as a christmas present. Well in the spirit of christmas i hid it from myself untill x-mas morning. It seemed okay then too but now,
When i turn my gun on it boots up and then goes to the -SAFE- screen. I then hold the first button to make it live. But the problem is that it will not stay live for more than 5 seconds at the max before it turns right back into -SAFE-. I inquired about this problem before and i was told to make sure that it was charged all the way.
Well today I plugged it all in and made sure that the bars were cascading correctly and such. I followed the manually exactly.
Well about 4 hours later it was comepletely charged, the bars had permanantly lit up all four. I unplugged it and turned it live to make sure everything was good. and i counted to about 10 seconds while it was live and i considered the problem fixed.
Well about 3 hours after that i decided to take the remaining air in my tank and shoot a few rounds to make sure everything was in order for tommorows paintballing. BUT THE PROBLEM CAME BACK! The gun will only stay live for about 5 seconds or maybe a split second before it changes right back to the -SAFE- screen. Is the board fried? Is there a wire frayed inside? Or is there a setting in the LCD frame that i can change?? Anything you suggest could help.
PLEASE HELP IF IF YOU CAN!! It may just be my bad luck but every marker i have owned has been going wrong in some way or another and this is a true karma killer.:sure:
Thanks,
-Pat
I got it used from a guy i know and i shot and used it before i bought it for myself as a christmas present. Well in the spirit of christmas i hid it from myself untill x-mas morning. It seemed okay then too but now,
When i turn my gun on it boots up and then goes to the -SAFE- screen. I then hold the first button to make it live. But the problem is that it will not stay live for more than 5 seconds at the max before it turns right back into -SAFE-. I inquired about this problem before and i was told to make sure that it was charged all the way.
Well today I plugged it all in and made sure that the bars were cascading correctly and such. I followed the manually exactly.
Well about 4 hours later it was comepletely charged, the bars had permanantly lit up all four. I unplugged it and turned it live to make sure everything was good. and i counted to about 10 seconds while it was live and i considered the problem fixed.
Well about 3 hours after that i decided to take the remaining air in my tank and shoot a few rounds to make sure everything was in order for tommorows paintballing. BUT THE PROBLEM CAME BACK! The gun will only stay live for about 5 seconds or maybe a split second before it changes right back to the -SAFE- screen. Is the board fried? Is there a wire frayed inside? Or is there a setting in the LCD frame that i can change?? Anything you suggest could help.
PLEASE HELP IF IF YOU CAN!! It may just be my bad luck but every marker i have owned has been going wrong in some way or another and this is a true karma killer.:sure:
Thanks,
-Pat