PDA

View Full Version : First Shot Drop Off


chaz
01-11-2005, 10:49 AM
I have just installed my evolve kit and it works great except for First shot drop off. my dwell is at 13 and my lpr is at 65. If I lower any of this the first ball like rolls out. Any ideas on this?

Mike Smith
01-11-2005, 04:00 PM
Is it an 03 Speed?

chaz
01-11-2005, 04:52 PM
Yes it is an 03 speed

crashdan
01-11-2005, 05:09 PM
did you have the problem before you installed the kit?

chaz
01-12-2005, 12:25 PM
No I did not.

winter001
01-13-2005, 03:14 PM
did you up the LPR to 100 psi before installing the kit?

chaz
01-13-2005, 03:54 PM
Yes I did that...

Trigga Nometry
01-13-2005, 04:12 PM
I was having a similiar problem but the serious drop off occured when I shot real fast.

I would suggest that you try and go back to using the stock LPR (take off the Evolve LPR Cap) and see if the same problem occurs.

speedfreakspb
01-14-2005, 03:31 AM
Adjust the screw on the volumizer and make sure your regs are clean.

MVpaintball
01-14-2005, 12:52 PM
did you grease the oring that Dale talk about in his review, cause he said that could cause FSDO.
EDIT: http://www.68caliber.com/features/reviews/story04634.php


And I think you could have the dwell &LPR lower, cause did one of the reviews say that it would take guns down to the lowest dwell and about 50psi?

SunTzu
01-20-2005, 08:43 AM
I had the same prob on my fly
but I regreased the lug on the valve stem end and the o-ring on it
poof it went away :clap: