ekkk my angel is on the fritz

[RiSk]

ok i am at the tournament and i am gettin my angel gased up and full of paint walk over the chrony and fire of a few rounds i am good on fps and what not, so i go back to my tent and get on the feild and let a few rip, then it goes full auto like here is how it went, bang, bang, bang, baaaaaagnangangadfkjda, (get the point?) then i hit the trigger and it stoped! is my trigger adjusted to much and bouncing off the micro switch? or is it the board and its just jacked? cuz if the board is jacked FLY CONVERSION HOOOOO

[crashdan]

it could be many things, trigger set to short and light that its bouncing, the microswitch could be bad as well, try adjusting the trigger first

[RiSk]

adjusted trigger to worse then stock, removed it cleaned it all and tested to see if it would do it with gas off and it didnt. so then i took it to the pb store and had them look at it he removed it and played with it and said its fine so i picked up and it went full auto and destroyed a paper towel (used to damper the noise) he was like "........... put a halo on it and watch it go" it ate tru a 68ci 3000 psi tank in no time flat could this be an air delivery problem?

[Crazy4Paintball1]

Usually when a gun does that it is the trigger setting. However you said you played with the trigger and it still does it? Have you looked at your micro switch? or tried replacing it?

[RiSk]

the micro is in perfect working order as far as i can tell , i can get a replacement board for 50 bucks i may go with that.

[Crazy4Paintball1]

Yeah you can give that a try or send it out to a tech and have them look at it...

[dilly man 2]

ahha, i might have ur problem solved. i had this same problem
does it shoot semi auto sometimes and then you pull the trigger again and it shoots 5 then 1 then 3 and so forth.
if so, look at ur trigger and check it out. mine did that and so i sent it to my tech and i paid 63.95 for a trigger adjustment... :-0
doesn't that suck ass?
so i would just say look at that trigger, then check out the microswitch then send it to a mt.
well thats my 2 cents. good luck

[Crazy4Paintball1]

$63.95 for a trigger adjustment??? I hope they did more than just adjust your trigger cause that is a good amount of change to spend on a "trigger adjustment"...

[|3@NZ@1666]

wow 63.95!! ouch well anyway. is your board ramping? like did you get it used on ebay or soemthing? cuz it sounds like you got mad bounce. btw are you a Thunder Cats fan?.... FLY CONVERSION HOOOOOOOOOO

[dilly man 2]

ya, he told me it was worse than that he got all technical and i just said okedoke. it looks like you know what your talking about. get the bill, it says repared trigger, adjustment on spring tension er something like that. he said at first the microswitch was cracked, then the board so i just said take it. and it came back with an adjusted trigger. i mean common really, throw me a bone here. so i got all pissy and said will you take it and work on it somemore. he said no itll cost another 100bucks.so i waled away. it turned out the gun had mad trigger bounce.
so just lengthen the trigger PLEASE listen to me.
there ya have it

[RiSk]

the trigger is past the normal (stock) length, and the spring is removed, im and just sticking a new board in it and seeing if it fix's it. if not fly conversion or worse go to the darkside! (smartparts)

[Crazy4Paintball1]

Dilly man 2 63.95 was a lot for that trigger adjustment, he must have killed you with the "labor fee" or whatever.

Risk- put a spring back in your gun. Sometimes when the spring is removed the trigger will become too light resulting in bouncing. IF you put a spring back in you might have enough resistance to keep it from bouncing and going nuts. We all hope you don't go to the dark side...lol

[RiSk]

ok good news fixed it, idk what i did, but i took the board out, check micro switch and checked the trigger poped it out cleaned the frame and the trigger used some lube from my PIMP and rubbed it up GOOD, put it all together again and the trigger feels 1000000x better and tommrow imma try to go gas it up and see if it works any better

bad news thou i think i have lost my barrel :headoff: its a chrome stocker if any of you have one that is chrome let me know.