2 Questions

[Bballstarr134]

:notsure: I was just workin on my trigger and all of the sudden the trigger wouldn't shoot! I found out that it is the spring leaf, buti don't know how to fix it. Does anyone know how to fix it?

Also does anyone know where I can buy any mod chips or boards to upgrade? :repost:



:cheers:

[shakeydounut87]

bend your leaf spring back to it's original position. it could be too far in to trigger the opto sensor. also..there arent any chips you can buy for the WDP Speed boards. the best you can do is upgrade to a A4 board, or get it MT flied from one of the MasterTechs which will turn the gun into a Fly with break beam eyes.
hope i helped.
larry-

[Bballstarr134]

The leaf has been bent so much that I don't even know how it should be. How would I find out where it has to be bent?

[Bballstarr134]

where would I be able to buy a mt mag trigger?

[shakeydounut87]

i'll take a picture of my leaf spring for you later. also..you can buy a MT trigger from here or any of the MasterTechs.. www.impactpaintball.com The mag mod, the store would do tho. just send your gun in for the mag mod and i gaurentee you will not be dispointed.

[Bballstarr134]

Great! Thanks for the info in the mag trigger 2!

[crashdan]

did you set the trigger too short that it wont let light pass by???

[Bballstarr134]

where does the light pass by?

[crashdan]

in the opto switch

[welted]

try adjusting your toe screw, or bending your leaf spring away from the board...

[Bballstarr134]

even when the leaf is bent so that it will cross the beam it still wont shootor even click

[welted]

hmm... are you sure it's crossing the beam. it seems i had a similar problem. what i did was this: take the trigger out of the frame and set it aside. then make completely sure that the leafspring isn't breaking the beam, then push it in with a small allen wrench, as if you were pulling the trigger. push it in until it won't go in anymore. this is to make sure that it isn't a problem with the trigger, toe-shoe, or the opto-switch. hopefully it'll click as if firing. also, make sure the gun is charged...

[Bballstarr134]

I found out what the problem is!!! The blue box that emits the beam was snapped off particially and when i tryed to turn it back around it totally broke. I dont kniw what to do but i am guessing that I should solder it?

[welted]

did you open up your board?