aftermarket regs and such

[Broddo]

From looking at my gun, it seems like i cannot put aftermarket regs on here. I am buying a low pressure tank in the next month (hopefully). But can someone take pictures of this mini reg mod so i can shoot my gun safely?
Also how do i change or check my dwell and lpr.

[welted]

you can put aftermarket regs on your 03 speed. just unscrew the minireg and stick your new reg into the flashtank ASA. but i would definitely recommend an LP tank instead.

to check your dwell turn on your marker, then push the center (yellow/orange) button on the back of your frame and scroll through the settings (battery, MROF, dwell, and sensi mode). refer to the manual to equate the LEDs to the value set for your dwell, but from memory i think three green is 8ms, three yellow is 12, and three orange is 16. to change your dwell you'll need to open up the grip cheek and push the yellow button inside on the board, and cycle to dwell, then using the green button i believe, adjust it to what you want...

to check your LPR you'll need an lpr-gauge found in the angel tool kit.

[Luzrd]

http://www.angel-owners.com/showthread.php?goto=newpost&t=22325
this will guide you through the minireg mod.
and the dwell lpr info is in the manual. youll need an angel toolkit to check the lpr.
to check the dwell cycle with the yellow button on the back of the frame until the dwell led is lit, the first green led=8ms and the last red =19

[Broddo]

it would be great if people could take pictures, and make a pictured walk through or video of this mini reg mod.

[shakeydounut87]

dont put an aftermarket reg on the angel. the WDP Mini-Reg are one of the best regs out there already. theres really nothing you need to upgrade on angels.

[welted]

the mini-reg works great, but if he's using an HP tank, he might be having problems getting below 300fps, so in that case an aftermarket reg might be a good choice for him. the biggest thing for me is that it looks rather dumb...