chopping?

[angelcd91]

my lcd is working fine but it is chopping..... what can i get to not make it chop.



thanks

[Fallout]

set your mrof below what your loader can feed. What kind of bolt do you have?

[angelcd91]

thanky you for helping me..anything thing else i should with the gun

[Grabowski_LCD]

Set you mrof below of what your loader is suposed to be able to do. Check if you have blowback by putting 3 balls in the neck (without hopper) and fire once if the top 2 pop out your bolt is to small for the chamber. You can also set your ram stroke that will fix it if the top two dont work. Mine broke n choped but i reset the ram and set the dwell to 15 (easyer on paint) and it works great now.

[Crazy4Paintball1]

Get eyes put in it or try a Jam bolt. I used a jam bolt on my lcd and never chopped again...

[cody11scrappy]

check the mrof, also what type of hopper you using?

Cody

[three fut nuthin]

yeah, be sure to set the LCD MROF at your hopper speeds.

egg:16
halo:20(max on the LCD)
Reloader:20
revvy 12-14

[three fut nuthin]

oops forgot to say, what paint are you using? barrel? you may not be gettinga good paint/barrel match?