Some questions and opinions on Euro Board

[pballin123]

So Basically, an angel speed with EURO board with eye conversion is almost exact to a new A4 FLY but with the speed body etc, and the EURO being LED not LCD?

can I have kinda like a compare/contrast on both?

[pballer290]

Theres no difference between the two boards except the led and lcd part. With the euro board you'll rip just as fast as with the fly board. You get all the same options. It won't be the exact same as a new fly because the fly has different internals. Besides all that once you get the conversion you'll be ripping beyond you're wildest dreams.

[Crazy Train]

Both will allow you to shoot incredibly fast. If you want to fine tune everything and have a game timer, shot counter, etc. go with a Fly board. If you want no hassle, turn on and shoot, go euro.

[pballin123]

yeah well I didn't know much about speeds, I was going to trade my gun for a euro'd speed with engel eyes

so yeah

[Skinny C]

is it with the euro board u just push a butten and the eyes go on/off and with the fly board u have to hold the trig? i just wanted to know for myself.

[pballer290]

You hold the trigger to turn the eyes off the euro board too. It fires a shot then the eyes are off. To turn the eyes back on you gotta turn off the marker and turn it back on.

[pballin123]

think a euro'd speed w/ UPS is worth a Lasoya timmy with a few up? JW

[Skinny C]

oh thanks. i didnt know that

[OriginalFormula-Duns]

if he gives you two lasoya timmys, give him the angel (unless ur giving the timmy.....then go for it) :):):) i lvoe angels

[welted]

whenever i can round up the money, i'm getting the Euro. i'm not really a fan of LCD boards...

[randyaponte]

i have a problem with my euro board, when i boot it up, after it shows the battery life instead of the green light coming on the two middle lights come on and it won't shoot, and i replaced the eyes with the g7 and it still does the same thing. any ideas??

thanks

[Sloffie]

with the euro the two lights in the middle means the eyes are on and its ready to go, but theres nothing in the breech. try puttin some paint in there

[randyaponte]

with the euro the two lights in the middle means the eyes are on and its ready to go, but theres nothing in the breech. try puttin some paint in there



yes, but when you put paint in the lights should go to green, but it doesn't do anything, and when you hold the trigger down to turn off the eyes nothing happen. they don't turn off


thanks

[welted]

the eye holes could be either blocked (with paint from a chop), or possibly they're not aligned properly...

[randyaponte]

the eye holes could be either blocked (with paint from a chop), or possibly they're not aligned properly...


i just put in the g7 eyes so you can see where the lazer is pointing, looks aligned, do you think there could be something a wrong with the board? i used it a couple of weeks ago, no problems and when i went to use it again it had this problem

[effbee]

Check your trigger adjustment. Open the grip frame and press the leaf spring with an allen wrench or something. Mine was doing that this past weekend I need to put some teflon tape on the toe screw to keep it from backing out.

[*I*A*]

the euro conversion is awesome and the G7 eyes make it soo much better just looks pimp

[angel_speed005]

does any body know where i could get the euro conversion done is it better then the fly conversion and how much does it cost with the g7 software included with the euro

Thinks
Curt

[*I*A*]

i had mine flyd but just had the euro board if i were u i would send it to Ken crane hes the Mt i sent mine to but any of the Mts could do it for you

[FATBACK]

As said any of the sponsors can hook you up.....i prefer bob moon (FMA).......also randyaponte, check all your connections........my wifes ir3 did the same thing and it was a broken wire :notsure:

[welted]

does any body know where i could get the euro conversion done is it better then the fly conversion and how much does it cost with the g7 software included with the euro

Thinks
Curt
i just had mine done by bob at FixMyAngel. the only way that the Euro is in any way "better" than the fly conversion is that it's $100 cheaper. Other than that it's exactly the same functionally. All the conversions come with the Laser eyes now, so that's cool. However you can't get the G7 software for the Euro because it's an LED board. you have to get the Fly conversion to get G7 software.