Lower Operating Pressure

[LordInferno]

ok ive seen on many sites that if you lower the angels pressure the gun will shoot straighter and further. Is there any truth behind this and how would an 04 speed and a 2k2 dark lcd need to be modified to accomplish this

:piss2::puzzled:

[OriginalFormula-Duns]

hey lord for the speeds its no problem at all. Ken Cranes settings are roughly as follows (i think....someone correct me if im wrong)

Input pressure: 450
Minireg pressure: 200-250
LPR: 60-70
Dwell: around 15......whatever works. I would say to find the lowest that works, and add two.

[LordInferno]

then what about 2k2 dark lcd's?? what should i do with that

[thog94]

There isn't much you can do to a LCD since it's a HP gun. As far as the Speed set up, you don't want your dewll at 15 with those settings, try 9 or 10.

[OriginalFormula-Duns]

hahaha thog i got in a long arguement with someone a few weeks ago over this. I personally run whatever three bars of dwell is, and it works beautifully. best iv ever seen any gun shoot. however, the reason i decided to say use what works is just to cover me. remember, the lowest possible dwell is usually the best (i think.....)

[Luzrd]

hahaha thog i got in a long arguement with someone a few weeks ago over this. I personally run whatever three bars of dwell is, and it works beautifully. best iv ever seen any gun shoot. however, the reason i decided to say use what works is just to cover me. remember, the lowest possible dwell is usually the best (i think.....)

3 leds=10 dwell,
the lower the dwell the faster the marker cycles, the higher the dwell the more compatable it is with brittle paint.

so low dwell=faster, high dwell=better on paint