noid(i think) problem

[kappellhoff]

help me out here guys.....i got a problem with my speed with A4 board in it. what has happened is that my solinoid does not want to fire. i turn sensi on...i turn sensi off...i detach sensi. still nothing, anyone know what the problem could be? Is my solinoid busted...will i have to buy a new one? this would help a lot! thanx to whoever finds it out

PS: i also had it shooting before...so its just recently happened, and my board is reading the shot

[Paintballjc]

Is your Seleloid plug that goes into your board in your HOP slot???

[Crazy Train]

Your board will always register a shot because you are tripping the opto sensor, regardless of if the solenoid is clicking or not. Make sure you have the solenoid wire plugged into the SOL port and not the HOP port. If it's in the SOL port, try repositioning the wire because sometimes the plug doesn't make good contact.

[kappellhoff]

k thanx guys.... and no its not in the HOP spot. made sure of that first...could it be a bad solinoid? if it is...where can i get one?

[firemedic30]

Also, try pushing the little button on the top of the 'noid. Sometimes you need to push that air out and "re-set" it.

If is is bad, anyone of the sponsors will do. Just try you closest one.

[kappellhoff]

nevermind, i found it out....its just really picky wires. thanx for all the help.